On comparison of recycled LDPE and LDPE–bakelite composite based 3D printed patch antenna
In the past two decades number of studies have been reported on the use of thermoplastics
as a substrate for 3D printed patch antennas. However, no work has been reported on the …
as a substrate for 3D printed patch antennas. However, no work has been reported on the …
Preparation of the pistachio shell reinforced PLA biocomposites: effect of filler treatment and PLA maleation
In this study, poly (lactic acid)(PLA)/pistachio shell (PS) biocomposites were fabricated by
melt functionalization through a one-step compatibilization process in varying PS filler rates …
melt functionalization through a one-step compatibilization process in varying PS filler rates …
Exploring the potential of sustainable natural cellulosic fiber from Sorghumbicolor (Sorghumvulgare var. technicus) stem for textile and composite applications
In the present research, the usability of cellulosic-based fibers obtained from the Sorghum
bicolor plant stem as reinforcing fibers in composites and textiles was investigated. The …
bicolor plant stem as reinforcing fibers in composites and textiles was investigated. The …
Photoaging phenomena of biodegradable polybutylene succinate and conventional low density polyethylene by artificial weathering–a comparative surface study
M Fritz, T Lauschke, T Schlebrowski, L Beucher… - Applied Surface …, 2022 - Elsevier
Polybutylene succinate (PBS) is a promising eco-friendly alternative to many conventional
plastics. It is not intended for outdoor use when a longer shelf life is desired. Research about …
plastics. It is not intended for outdoor use when a longer shelf life is desired. Research about …
Application of titanium dioxide nanorod (TNr)@SiO2 with low photocatalytic effect and high UV resistance in poly(vinyl chloride) film
J Cheng, C Shi, Y Dong, J Han - Journal of Thermoplastic …, 2025 - journals.sagepub.com
Ultraviolet (UV) radiation has a detrimental effect on the outdoor lifetime of PVC film
materials. TiO2 nanoparticles, as commonly used UV absorbers, still suffer from poor …
materials. TiO2 nanoparticles, as commonly used UV absorbers, still suffer from poor …
[HTML][HTML] Investigation of Mechanical Properties and Color Changes of 3D-Printed Parts with Different Infill Ratios and Colors After Aging
Since their inception, plastics have become indispensable materials. However, plastics used
for extended periods in industrial applications are prone to aging, which negatively impacts …
for extended periods in industrial applications are prone to aging, which negatively impacts …
Extraction of Lightweight Platanus orientalis L. Fruit's Stem Fiber and Determination of Its Mechanical and Physico-Chemical Properties and Potential of Its Use in …
AI Kaya - Polymers, 2024 - mdpi.com
Natural fibers extracted from plants are preferred as an alternative to synthetic products. The
main reasons for this preference are their affordable cost, light weight and good mechanical …
main reasons for this preference are their affordable cost, light weight and good mechanical …
The effect of UV additives on thermo-oxidative and color stability of pistachio shell reinforced polypropylene composites
In this study, pistachio shell-polypropylene copolymer (PPc) biocomposites were prepared
by using the melt compounding technique. Treated pistachio shell (TPS)(30% wt) was …
by using the melt compounding technique. Treated pistachio shell (TPS)(30% wt) was …
The impact of glycol water exposure on PA6/GF30 properties
I Ksouri, OD Almeida, N Haddar - Journal of Thermoplastic …, 2024 - journals.sagepub.com
The current paper aims to study the behavior of Polyamide 6 (PA6) and Polyamide 6
reinforced with 30% of short glass fibers (PA6GF30) under glycol water (GW) mixture used …
reinforced with 30% of short glass fibers (PA6GF30) under glycol water (GW) mixture used …
Accelerated aging of polymer composite from Pennisetum purpureum fibers with recycled low-density polyethylene
CC Grillo, C Saron - Journal of Composite Materials, 2023 - journals.sagepub.com
The use of natural fibers (NF) as reinforcement in polymer composites have been an
interesting option to improve their mechanical properties and to decrease production costs …
interesting option to improve their mechanical properties and to decrease production costs …