Investigation of microstructure, wear and transverse rupture strength of WE43/nano B4C composites produced by powder metallurgy method
In this study, nano B 4 C powder metal composite samples reinforced in WE43 matrix with
different ratios (0.25, 0.5, 1 and 2 wt%) were produced by hot pressing method. The …
different ratios (0.25, 0.5, 1 and 2 wt%) were produced by hot pressing method. The …
Improving the wear resistance of the magnesium alloy WE43 by cold sprayed Ni–Al2O3 and Ni–Zn–Al2O3 coatings
Lightweight magnesium (Mg) alloys are employed in a wide range of applications due to
their high specific strengths. Nevertheless, some applications require improvement of the …
their high specific strengths. Nevertheless, some applications require improvement of the …
Enhancing wear and corrosion resistance of magnesium alloys through in-situ Al2O3 doping for plasma electrolytic oxidation coating
Y Li, C Li, Q Wang, X Zhao, T Zhang, F Wang - Materials Today …, 2024 - Elsevier
The surface of PEO coatings may contain micro-cracks and pores, which can facilitate the
penetration of corrosive media and initiate corrosion. Doping particles has been identified as …
penetration of corrosive media and initiate corrosion. Doping particles has been identified as …
The Effect of Sodium Tetrafluoroborate on the Properties of Conversion Coatings Formed on the AZ91D Magnesium Alloy by Plasma Electrolytic Oxidation
Magnesium and its alloys are widely used in many areas because of their light weight,
excellent dimensional stability, and high strength-to-weight ratio. However, the material …
excellent dimensional stability, and high strength-to-weight ratio. However, the material …
Influence of loading direction on mechanical behavior, microstructure characteristic and texture evolution of WE43-T4 magnesium alloy undergoing uniaxial …
Y Ruan, L Hu, S Zhang, Q Chen, T Zhou… - Materials Today …, 2022 - Elsevier
To elucidate the influence of loading direction on deformation behavior of WE43-T4
magnesium (Mg) alloy, compressive tests, optical microstructure (OM), X-ray diffraction …
magnesium (Mg) alloy, compressive tests, optical microstructure (OM), X-ray diffraction …
Surface modification of WE43 Mg alloy via combination of cold spray and micro-arc oxidation for wear related applications at high temperatures
This study investigates the high temperature wear behaviour of a WE43 Mg alloy after
covering it with single and dual layer coatings. For this purpose, cold spray and micro-arc …
covering it with single and dual layer coatings. For this purpose, cold spray and micro-arc …
氧化时间对微弧氧化非均质陶瓷膜工频击穿特性的影响
张萌， 李昊旻， 张淇瑞， 孔诗琴， 耿英三， 雷厉 - 高电压技术, 2024 - epjournal.csee.org.cn
目前对微弧氧化陶瓷膜绝缘击穿特性的研究多集中于改变工艺参数所产生的影响,
对处于不同生长阶段的陶瓷膜绝缘击穿特性尚不清晰. 为此, 研究了陶瓷膜生长过程中工频击穿 …
对处于不同生长阶段的陶瓷膜绝缘击穿特性尚不清晰. 为此, 研究了陶瓷膜生长过程中工频击穿 …
Effects of PEO and BN-PVD coatings on the wear, corrosion, and surface properties of AZ31 magnesium alloy
TC Senocak - Physica Scripta, 2024 - iopscience.iop.org
This study investigates the effects of Plasma Electrolytic Oxidation (PEO) and subsequent
Boron Nitride (BN) coatings applied via Physical Vapor Deposition (PVD) on the wear …
Boron Nitride (BN) coatings applied via Physical Vapor Deposition (PVD) on the wear …
Investigation of Mechanical Behavior and Surface Characteristics of Cold Spray Metallized B4C/AA7075 Composites Coated by AZ64 Alloy through Plasma …
S Thunaipragasam, AB Kolekar… - Journal of …, 2023 - Wiley Online Library
Metallized cold‐spray coatings were employed to make B4C/AA7075 and aluminum+
plasma electrolytic oxidation (PEO) duplex coatings on AZ64. In addition, the phase …
plasma electrolytic oxidation (PEO) duplex coatings on AZ64. In addition, the phase …
Mechanism, models, and influence of heterogeneous factors of the microarc oxidation process: A comprehensive review
E Pecherskaya, P Golubkov, S Konovalov… - Reviews on Advanced …, 2024 - degruyter.com
The shortcomings of the microarc oxidation (MAO) technology are revealed, in accordance
with which a range of topical scientific problems that need to be solved is formulated. It is …
with which a range of topical scientific problems that need to be solved is formulated. It is …