Advanced techniques for characterization of ion beam modified materials
Understanding the mechanisms of damage formation in materials irradiated with energetic
ions is essential for the field of ion-beam materials modification and engineering. Utilizing …
ions is essential for the field of ion-beam materials modification and engineering. Utilizing …
Effects of sequential tungsten and helium ion implantation on nano-indentation hardness of tungsten
To simulate neutron and helium damage in a fusion reactor first wall sequential self-ion
implantation up to 13 dpa followed by helium-ion implantation up to 3000 appm was …
implantation up to 13 dpa followed by helium-ion implantation up to 3000 appm was …
Strengthening mechanisms in Fe-Al based ferritic low-density steels
Low-density steels with different aluminium contents have been investigated with an aim to
examine the occurrence of different strengthening mechanisms leading to its higher …
examine the occurrence of different strengthening mechanisms leading to its higher …
On the understanding of microstructural evolution during hot deformation of n-ODS-18Cr ferritic steel containing heterogeneous microstructure
R Jarugula, S Koppoju, R Jeyaraam… - Materials Science and …, 2021 - Elsevier
The objective of the present work is to investigate the microstructural evolution during hot
deformation of nano oxide dispersion strengthened (n-ODS) Fe–18Cr ferritic steel over a …
deformation of nano oxide dispersion strengthened (n-ODS) Fe–18Cr ferritic steel over a …
Hierarchical microstructure in mesoporous SnO2 beads
Tin oxide (SnO2) mesoporous beads are a significant category of nanostructured materials
with extensive applications in sensors and energy storage. In this study, we report the …
with extensive applications in sensors and energy storage. In this study, we report the …
Creep deformation behavior of nano oxide dispersion strengthened Fe–18Cr ferritic steel
The objective of present work is to investigate the creep behavior of nano oxide dispersion
strengthened Fe–18Cr ferritic steel (Fe–18Cr–3W–0.3 Ti–0.35 Y 2 O 3) over a range of …
strengthened Fe–18Cr ferritic steel (Fe–18Cr–3W–0.3 Ti–0.35 Y 2 O 3) over a range of …
Synthesis, characterization, conductivity, magnetic and magnetoresistance studies of Sr2Fe1 − xInxMoO6 (x = 0.0 and 0.2) double perovskite
Y Markandeya, YS Reddy, S Bale… - Journal of Materials …, 2018 - Springer
Abstract Double perovskite materials Sr 2 Fe 1− x In x MoO 6 (x= 0.0 and 0.2) were
synthesized by sol–gel process. The materials were analyzed by X-ray diffraction and it is …
synthesized by sol–gel process. The materials were analyzed by X-ray diffraction and it is …
Morphology of ion irradiation induced nano-porous structures in Ge and Si1− xGex alloys
Crystalline Ge and Si 1− x Ge x alloys (x= 0.83, 0.77) of (100) orientation were implanted
with 140 keV Ge− ions at fluences between 5× 10 15 to 3× 10 17 ions/cm 2, and at …
with 140 keV Ge− ions at fluences between 5× 10 15 to 3× 10 17 ions/cm 2, and at …
Ion-erosion induced surface nanoporosity and nanotopography on Si
P Süle - The Journal of chemical physics, 2011 - pubs.aip.org
The low-energy ion-bombardment induced surface nanotopography and the nanopatterning
of Si has been simulated by atomistic simulations using an approach based on molecular …
of Si has been simulated by atomistic simulations using an approach based on molecular …
Fabrication of double barrier structures in single layer c-Si–QDs/a-SiOx films for realization of energy selective contacts for hot carrier solar cells
D Kar, D Das - Journal of Applied Physics, 2017 - pubs.aip.org
Thin films of c-Si–QDs embedded in an a-SiO x dielectric matrix forming arrays of double
barrier structures have been fabricated by reactive rf-magnetron sputtering at∼ 400 C …
barrier structures have been fabricated by reactive rf-magnetron sputtering at∼ 400 C …