High-entropy materials (HEM), including alloys, ceramics, and composites, are a novel class
of materials that have gained enormous attention over the past two decades. These multi …

Abstract CuAl x NiCrFe (x= 0.5, 1, 1.5, 2) high-entropy alloys (HEAs) with good high-
temperature oxidation resistance were deposited as bond coats via high-speed laser …

In this study, the hot corrosion of SLMed IN738LC and wrought GH738 alloy in mixed salt of
75% Na 2 SO 4+ 25% NaCl at 900℃ is investigated. The results show that the hot corrosion …

In this study, large α-Al 2 O 3 particles were prepared by a novel surface pre-agglomeration
(SPA) treatment on the surface of MCrAlY bond coats. These large α-Al 2 O 3 particles …

Surface coatings are the best ways to protect materials from deterioration due to various
aspects including corrosion and wear. However, after long-term oxidation, the high …

In this study, the effect of NiCoCrAlY bond coating modified by micron-and nano-sized Nb
particles on the oxidation behavior of a TiAl alloy/thermal barrier coating (TBC) system was …

This paper investigated the coarsening kinetics of needle-shaped γ precipitates in CoNiCrAl
alloys after isothermal heat treatments at 900° C and 1100° C. The CoNiCrAl alloys were …

In this paper, the microstructure and thermophysical properties of two CoNiCrAl bond coat
alloys with differing Al contents were investigated. Two CoNiCrAl alloys with compositions of …

This paper studied the effects of internal oxide contents on the high temperature oxidation
and β-phase depletion behaviour of high velocity oxygen fuel (HVOF) thermally sprayed …

This paper investigates the high temperature oxidation behaviour of combustion flame
sprayed CoNiCrAlY coatings. Three CoNiCrAlY coatings with different fractions of internal …