The advantages of additive manufacturing (AM) of metals over traditional manufacturing
methods have triggered many relevant studies comparing the mechanical properties …

Additive manufacturing (AM) is associated with a sequence of rapid heating and cooling
cycles along with large temperature gradients, developing complex thermal histories which …

The corrosion resistance of 431 stainless coatings produced by a novel surface modification
technology (EHLA) was analyzed. As the cladding speed increased, the dendrites became …

The effect and mechanism of ultrasonic vibration on the microstructure and performance of
laser cladding 316L coating has been studied, providing a theoretical basis and technical …

This study investigated the dependent relationships between the microstructure and
corrosion resistance of the 316L part using wire and arc additive manufacturing (WAAM) …

Abstract 2205 Duplex stainless steel components were built using gas atomized powder ((D
90< 45 μm) via selective laser melting The relative density of the annealed component …

The 304 stainless steel coating was prepared successfully in water environment directly
through an in-situ underwater laser cladding technique utilizing an underwater gas …

The internal-pipeline local corrosion in the welded joint region has been a widely
concerning issue, particularly under the synergistic effect of high shear stress and …

The corrosion behavior of the {100},{110},{111} planes of a single-crystalline-like stainless
steel 316L (SS316L) produced by laser powder bed fusion (LPBF) was investigated in 3.5 …

This study aims to improve the corrosion resistance of the low carbon steel by cladding it
with super duplex stainless steel using laser powder bed fusion process. Critical process …