Transient emission characteristics of a heavy-duty natural gas engine at stoichiometric operation with EGR and TWC

Q Zhang, M Li, G Li, S Shao, P Li - Energy, 2017 - Elsevier
The recent issued emission regulations have more stringent standards for the transient
emissions of natural gas engines. When equipped with cooled exhaust gas recirculation …

Methodology for optical engine characterization by means of the combination of experimental and modeling techniques

JV Pastor, P Olmeda, J Martín, F Lewiski - Applied sciences, 2018 - mdpi.com
Optical engines allow for the direct visualization of the phenomena taking place in the
combustion chamber and the application of optical techniques for combustion analysis …

Transition from HCCI to PPC: investigation of fuel distribution by planar laser induced fluorescence (PLIF)

Z Wang, S Lonn, A Matamis, O Andersson… - … International Journal of …, 2017 - JSTOR
In a previous study, in order to investigate the effect of charge stratification on combustion
behavior such as combustion efficiency and combustion phasing which also largely affects …

A novel method for correction of temporally-and spatially-variant optical distortion in planar particle image velocimetry

K Zha, S Busch, C Park, PC Miles - Measurement Science and …, 2016 - iopscience.iop.org
In-cylinder flow measurements are necessary to gain a fundamental understanding of swirl-
supported, light-duty Diesel engine processes for high thermal efficiency and low emissions …

Effects of different injection strategies on ignition and combustion characteristics in an optical PPC engine

M Zhang, S Derafshzan, M Richter, M Lundgren - Energy, 2020 - Elsevier
abstract Although multiple injection strategies have a significant influence on partially
premixed combustion (PPC) efficiency, the mechanisms behind the influence are still to be …

Combustion and particulate matter emission characteristics for diesel engine run by partially-premixed low-temperature combustion mode

B Liu, X Cheng, J Liu, H Pu, L Yi - 2017 - sae.org
Partially-premixed low-temperature combustion avoids the soot and NOx generation area on
the Ф-T diagram to reduce both engine NOx and soot emissions. Compared with the HCCI …

Effects of injection timing on fluid flow characteristics of partially premixed combustion based on high-speed particle image velocimetry

MI Najafabadi, S Tanov, H Wang, B Somers… - … International Journal of …, 2017 - JSTOR
Partially Premixed Combustion (PPC) is a promising combustion concept, based on
judicious tuning of the charge stratification, to meet the increasing demands of emission …

Experimental investigation of injection strategies on particle emission characteristics of Partially-premixed low temperature combustion mode

B Liu, X Cheng, J Liu, H Pu - Applied Thermal Engineering, 2018 - Elsevier
Compared with the traditional combustion mode, Partially-premixed combustion (PPC)
mode can reduce the particulate emissions. However, the particulate emission …

Influence of the number of injections on piston heat rejection under low temperature combustion conditions in an optical compression-ignition engine

S Tanov, J Salvador-Iborra, Ö Andersson… - Energy Conversion and …, 2017 - Elsevier
New combustion concepts are being investigated to develop cleaner engines. One of the
most promising is partially premixed combustion. The mechanisms of this combustion mode …

High-speed optical and laser diagnostics-Internal combustion engines and gas turbine applications

S Derafshzan - 2023 - portal.research.lu.se
Increasing demands to meet regulations on combustion emissions and their environmental
impact, and the need to improve their efficiency in different applications, have been the …