Baseline high heat flux and plasma facing materials for fusion
Y Ueda, K Schmid, M Balden, JW Coenen… - Nuclear …, 2017 - iopscience.iop.org
In fusion reactors, surfaces of plasma facing components (PFCs) are exposed to high heat
and particle flux. Tungsten and Copper alloys are primary candidates for plasma facing …
and particle flux. Tungsten and Copper alloys are primary candidates for plasma facing …
Conceptual design study for heat exhaust management in the ARC fusion pilot plant
The ARC pilot plant conceptual design study has been extended beyond its initial scope [BN
Sorbom et al., FED 100 (2015) 378] to explore options for managing∼ 525 MW of fusion …
Sorbom et al., FED 100 (2015) 378] to explore options for managing∼ 525 MW of fusion …
Sub-ms laser pulse irradiation on tungsten target damaged by exposure to helium plasma
The effects of a transient heat load on tungsten damaged by helium plasma irradiation have
been investigated using a ruby laser with long pulse duration in the divertor simulator …
been investigated using a ruby laser with long pulse duration in the divertor simulator …
Effects of ELMs on ITER divertor armour materials
A Zhitlukhin, N Klimov, I Landman, J Linke… - Journal of nuclear …, 2007 - Elsevier
This paper is concerned with investigation of an erosion of the ITER-like divertor plasma
facing components under plasma heat loads expected during the Type I ELMs in ITER …
facing components under plasma heat loads expected during the Type I ELMs in ITER …
Recrystallization and grain growth induced by ELMs-like transient heat loads in deformed tungsten samples
Tungsten has been chosen as the main candidate for plasma facing components (PFCs)
due to its superior properties under extreme operating conditions in future nuclear fusion …
due to its superior properties under extreme operating conditions in future nuclear fusion …
Application of powerful quasi-steady-state plasma accelerators for simulation of ITER transient heat loads on divertor surfaces
VI Tereshin, AN Bandura, OV Byrka… - Plasma Physics and …, 2007 - iopscience.iop.org
The paper presents the investigations of high power plasma interaction with material
surfaces under conditions simulating the ITER disruptions and type I ELMs. Different …
surfaces under conditions simulating the ITER disruptions and type I ELMs. Different …
The latest results from ELM-simulation experiments in plasma accelerators
IE Garkusha, NI Arkhipov, NS Klimov, VA Makhlaj… - Physica …, 2009 - iopscience.iop.org
Recent results of ELM-simulation experiments with quasi-stationary plasma accelerators
(QSPAs) Kh-50 (Kharkov, Ukraine) and QSPA-T (Troitsk, Russia) as well as experiments in …
(QSPAs) Kh-50 (Kharkov, Ukraine) and QSPA-T (Troitsk, Russia) as well as experiments in …
Investigation of tungsten and beryllium behaviour under short transient events
G Pintsuk, W Kühnlein, J Linke, M Rödig - Fusion Engineering and Design, 2007 - Elsevier
The study of melting behaviour and crack formation, which occurs during short transient
events, is of significant importance for the qualification of materials for future fusion devices …
events, is of significant importance for the qualification of materials for future fusion devices …
Experimental simulation of materials degradation of plasma-facing components using lasers
The damage and erosion of plasma-facing components (PFCs) due to extremely high heat
loads and particle bombardment is a key issue for the nuclear fusion community. Currently …
loads and particle bombardment is a key issue for the nuclear fusion community. Currently …
Modelling of Kelvin–Helmholtz instability and splashing of melt layers from plasma-facing components in tokamaks under plasma impact
GV Miloshevsky, A Hassanein - Nuclear fusion, 2010 - iopscience.iop.org
Plasma-facing components (PFCs) in tokamaks are exposed to high-heat loads during
abnormal events such as plasma disruptions and edge-localized modes. The most …
abnormal events such as plasma disruptions and edge-localized modes. The most …