Heat and fluid flow in high-power LED packaging and applications

X Luo, R Hu, S Liu, K Wang - Progress in Energy and Combustion Science, 2016 - Elsevier
Light-emitting diodes (LEDs) are widely used in our daily lives. Both light and heat are
generated from LED chips and then transmitted or conducted through multiple packaging …

Review of defrosting methods

M Amer, CC Wang - Renewable and Sustainable Energy Reviews, 2017 - Elsevier
This study reviewed the defrosting techniques applicable for the heating, ventilation, air-
conditioning, and refrigeration industry, including passive, active, and system techniques …

Preparation and thermal conductivity enhancement of composite phase change materials for electronic thermal management

W Wu, G Zhang, X Ke, X Yang, Z Wang, C Liu - Energy conversion and …, 2015 - Elsevier
A kind of phase change material board (PCMB) was prepared for use in the thermal
management of electronics, with paraffin and expanded graphite as the phase change …

Review on the history, research, and applications of electrohydrodynamics

ED Fylladitakis, MP Theodoridis… - IEEE Transactions on …, 2014 - ieeexplore.ieee.org
Corona discharge refers to the phenomenon when the electric field near a conductor is
strong enough to ionize the dielectric surrounding it but not strong enough to cause an …

Recent advances in electrohydrodynamic pumps operated by ionic winds: a review

MJ Johnson, DB Go - Plasma Sources Science and Technology, 2017 - iopscience.iop.org
An ionic or electric wind is a bulk air movement induced by electrohydrodynamic (EHD)
phenomena in a gas discharge. Because they are silent, low power, respond rapidly, and …

Review on the recent development of corona wind and its application in heat transfer enhancement

J Wang, T Zhu, Y Cai, J Zhang, J Wang - … Journal of Heat and Mass Transfer, 2020 - Elsevier
Corona discharge-produced ionic wind has drawn considerable attention as a potential
candidate to solve the thermal problems that originate from heat accumulation in small-scale …

Heat dissipation of electronic components by ionic wind from multi-needle electrodes discharge: Experimental and multi-physical analysis

J Qu, J Zhang, M Li, W Tao - International Journal of Heat and Mass …, 2020 - Elsevier
High temperature during electronic components operation can cause the failure of PN
junctions of chips, and it can even damage the entire component. Ionic wind is a promising …

A review on recent advances and challenges of ionic wind produced by corona discharges with practical applications

J Qu, M Zeng, D Zhang, D Yang, X Wu… - Journal of Physics D …, 2021 - iopscience.iop.org
Ionic wind, an induced phenomenon during corona discharge, possessing the features of
silent operation and no moving parts, has a wide range of applications. Ionic wind …

New applications of an automated system for high-power LEDs

J Li, X Zhang, C Zhou, J Zheng, D Ge… - … /Asme Transactions On …, 2015 - ieeexplore.ieee.org
An automatic system based on thermoelectric cooler (TEC), a microfan, and microcontroller
is first applied to thermal management of high-power light-emitting diodes (LEDs). Its …

LED chip cooling system using ionic wind induced by multi-wire corona discharge

J Qu, D Zhang, J Zhang, W Tao - Applied Thermal Engineering, 2021 - Elsevier
The high temperature of a light-emitting diode (LED) chip reduces its luminous output and
lifetime and can even cause catastrophic damage to the chip. In recent years, ionic wind …