A review on failure theories and simulation models for adhesive joints
K Tserpes, A Barroso-Caro, PA Carraro… - The Journal of …, 2022 - Taylor & Francis
In the framework of the Cost Action CERTBOND (Reliable roadmap for certification of
bonded primary structures), a wide group of researchers from 27 European Countries have …
bonded primary structures), a wide group of researchers from 27 European Countries have …
On characterization of cohesive zone model (CZM) based upon digital image correlation (DIC) method
Cohesive zone model (CZM) has been extensively applied in numerical simulation of
interfacial fracture behaviors such as composite delamination and fracture of adhesive …
interfacial fracture behaviors such as composite delamination and fracture of adhesive …
Progressive failure model of high strength glass fiber composite structure in hygrothermal environment
X Wang, P Jia, B Wang - Composite Structures, 2022 - Elsevier
In this paper, a progressive damage model considering hygrothermal effect is established.
Taking high strength glass fiber composite plate as an example, the progressive damage …
Taking high strength glass fiber composite plate as an example, the progressive damage …
The role of intralaminar damages on the delamination evolution in laminated composite structures
Delamination is a major failure mode affecting laminated composite structures. This failure
mechanism, if not properly monitored, can lead to uncontrolled cracks growth and premature …
mechanism, if not properly monitored, can lead to uncontrolled cracks growth and premature …
Investigation of the mechanical response of laminated composites reinforced with different type wire mesh
In this study, the mechanical behavior of laminated glass fiber composite plates reinforced
with wire meshes under in-plane and out-of-plane loads was investigated. For this purpose …
with wire meshes under in-plane and out-of-plane loads was investigated. For this purpose …
[HTML][HTML] Multi-layer continuum model for adhesive FM 300-2 in end-notched flexure carbon laminate
The current investigation analyses the un-stable crack initiation of an adhesively bonded
End Notched Flexure (ENF) specimen by means of a continuum damage formulation, based …
End Notched Flexure (ENF) specimen by means of a continuum damage formulation, based …
Mode-I interlaminar fracture modeling of DCB composite laminate using finite element techniques
Interlaminar fracture is the most common type of failure in polymeric textile composites
because these composites are prone to delaminate under the influence of external loading …
because these composites are prone to delaminate under the influence of external loading …
Comparative study of failure models for prediction of mixed-mode failure characteristics in composite adhesively bonded joint with brittle/Quai-brittle adhesive using …
MH Kim, UI Ri, HS Hong, YC Kim - International Journal of Adhesion and …, 2021 - Elsevier
In the paper, detailed numerical comparisons are considered for the mixed-mode failure
characteristics of different composite adhesively bonded joints with brittle/quasi-brittle …
characteristics of different composite adhesively bonded joints with brittle/quasi-brittle …
[HTML][HTML] Multi-layer continuum model for adhesive films with knitted carrier
Film adhesives are a form of composite consisting of two constituents ie fibrous carrier and
matrix. The fracture surfaces are usually dominated by the carrier-matrix de-bonding, but it …
matrix. The fracture surfaces are usually dominated by the carrier-matrix de-bonding, but it …
[HTML][HTML] 基于有限元技术的疲劳裂纹扩展方法研究进展
苏玉昆， 马涛， 赵晓鑫， 张光亮， 朱加雷， 张鹏 - 力学进展, 2024 - lxjz.cstam.org.cn
疲劳裂纹是引起工程结构断裂失效的重要因素之一. 目前疲劳裂纹扩展的有限元仿真商业软件有
ANSYS, ABAQUS, FRANC3D, ZENCRACK 等, 这些软件为疲劳裂纹扩展过程的研究提供了 …
ANSYS, ABAQUS, FRANC3D, ZENCRACK 等, 这些软件为疲劳裂纹扩展过程的研究提供了 …