Nanofluid application as the working fluid is proposed as a way for improving the solar
system performance. In this study, a dish concentrator with a cylindrical cavity receiver was …

Liquid lead–bismuth eutectic alloy is one of the candidate coolants for fourth-generation
nuclear power systems because of its good physical and chemical properties, neutron …

Recently, a structurally-simple but compositionally-complex FeNiCoMnCr high entropy alloy
was found to have excellent mechanical properties (eg, high strength and ductility). To …

The effect of pre-oxidation in air at 300–500° C on the initiation and development of liquid
metal corrosion attack on 316L austenitic steel in static lead-bismuth eutectic (LBE) with∼ …

The deployment of Gen-IV lead-cooled fast reactors requires a good compatibility between
the selected structural/cladding steels and the inherently corrosive heavy liquid metal …

The corrosion behavior of three stainless steels (316L, Alkrothal 720 and Kanthal-APM) in
static LBE with oxygen concentration of 10− 5 wt% at temperatures of 700° C for 230 h and …

Fast reactors and targets in spallation neutron sources are considering lead bismuth eutectic
(LBE) as a coolant. However, LBE is a rather corrosive medium for most steels and container …

Three austenitic steels (316L, DIN 1.4970 tube and rod material) were tested up to 5000 h at
temperatures between 400 and 500° C in PbBi containing 10− 8 wt% oxygen and at 450° C …

Controlling oxygen content in the primary circuit of nuclear reactors is one of the key tasks
needed to ensure the safe operation of nuclear power plants where lead-bismuth eutectic …

Lead and its alloys are commonly used as coolant and liquid spallation neutron targets for
advanced nuclear reactors and ADS systems. Pb-Mg alloy may be a potential coolant and …