Polystyrene (PS) has brought in vitro cell culture from its humble beginnings to the modern
era, propelling dozens of research fields along the way. This review discusses the …

Injection molding is the most widely used processing technique for polymers. It offers several
advantages over other processing conditions such as good surface finish, the ability to …

Plastic injection molding is suitable for mass production articles since complex geometries
can be obtained in a single production step. However, the difficulty in setting optimal process …

In this study, it is attempted to give an insight into the injection processability of three self-
prepared polymers from A to Z. This work presents material analysis, injection molding …

A systematic study on the effect of processing conditions on mold shrinkage was undertaken
for seven common thermoplastic polymers. It turned out that the holding pressure was …

The accurate prediction of shrinkage and warpage of injection molded parts is important to
achieve successful mold design with high precision. In this study, the numerical analysis of …

In recent years, polymer components with surface microstructures have been in rising
demand for applications such as lab-on-a-chip and optical components. Injection molding …

The phenomenon of shrinkage in injection molding is particularly relevant for the processing
of semicrystalline polymers. Nevertheless, if compared with the considerable effort spent by …

In this work an amorphous PS was injection molded into a simple line‐gated rectangular
cavity. The effect on post‐filling pressure curves and temperatures (at the polymer‐mold …

Polypropylene (PP) filled with 10 wt% multi‐walled carbon nanotube (CNT) nanocomposites
were prepared via masterbatch dilution and subjected to microinjection molding (μIM) under …