Taking the relay of the large Hadron collider (LHC) at CERN, ITER has become the largest
project in applied superconductivity. In addition to its technical complexity, ITER is also a …

The performance of the toroidal field (TF) magnet conductors for the ITER machine are
qualified by a short full-size sample (4 m) current sharing temperature (T cs) test in the …

The coupling of electrical and mechanical modeling of superconducting cable in conduit
conductors (CICCs) can be useful for the understanding of the complex phenomena …

The ITER machine will require approximately 275 tons of Nb− Ti strands that will be used in
poloidal field (PF) coils, correction coils (CC) and feeder busbars. The performance of all …

The current uniformity among the strands in large cabled conductors is affected mostly by
the contact resistance distribution and the interstrand resistance in the electrical …

The main parameter measured in the tests of the TF conductors for the ITER machine is the
current sharing temperature (T CS). In the voltmetric assessment of T CS, the voltages are …

Abstract The application of Nb3Sn superconductor joints is an important part in the
production of ITER, MRI and so on. This paper first introduced the application, like coil of …

A Nb3Sn cable-in-conduit (CIC) conductor is adopted for Toroidal Field (TF) coils of ITER.
One of the TF coils consists of seven double-pancake coils that are jointed to the neighbor …

Since year 2009, the joint of the toroidal field (TF) conductor samples tested in the SULTAN
facility at PSI Villigen, CH, is solder-filled, so that the helium coolant can only flow axially …

Joint sample tests have been carried out as a qualification test for ITER Toroidal Field (TF)
coils. The joint sample comprises two short TF conductors that have" twin-box" joint …