A comparative study of the microstructure, surface chemical and phase composition,
microtopography, surface roughness, microhardness, and corrosion properties of …

In the present study, ultrasonic impact treatment was applied to promote the as-cast Al x
CoCrFeMnNi (x= 0, 0.5, 1.0 and 1.5) high entropy alloys, and the microstructures, phase …

The aim of this study is to improve the comprehensive properties of CoCrFeNiCu high
entropy alloy coating (HEAc) prepared by induction cladding by means of ultrasonic impact …

This study intends to investigate the feasibility of using laser cladding as a potential process
to repair hot working tools by a hardfacing process. A Stellite 21 alloy coating was printed on …

In this research, ultrasonic impact treatment was introduced on the surfaces of laser cladding
Al 0.5 CoCrFeMnNi high entropy alloy coatings. The results showed that obvious …

Biomaterials should be thoroughly studied in order to make sure they do not cause any harm
to the human body. Considering that biocompatibility is very strict, the material must be non …

To improve the high-temperature oxidation performance of remanufactured coatings, a novel
Cr 3 C 2–NiCrCoMo (NCC) coating with modified multielement alloy adhesive phase was …

X-ray photoelectron spectroscopy, scanning electron microscopy with energy dispersive X-
ray microanalysis and X-ray diffraction were employed to study the surface chemical and …

Metal-polymer articulating pairs are common in engineering applications. The present study
aims at improving the wear resistance of the polymeric part and the wear-corrosion …

Low thermal expansion (LTE) ceramics are needed to relieve stress in fine devices. Here we
adopt high entropy to realise LTE (ZrMgAlFeCr) 0.4 Mo 1.5 W 1.5 O 12 with an orthorhombic …