The layer thickness has been reported to play a crucial role in laminated metal composites
(LMCs). In this work, Al/Ti/Al LMCs with varying Ti layer thickness but a constant number of …

Abstract In this work, Ti/Al and Ti/Ni metal intermetallic laminates (MILs) prepared by
diffusion bonding are compared based on the intermetallic phases formed, specific strength …

The present study evaluates the dynamic compression behavior of Ti/TiAl3/Al metal
intermetallic laminates (MILs) at a strain rate of 1000 s–1 and the corresponding failure …

Ti/Al-based composites and intermetallic compounds attracted great attention due to their
good mechanical properties combined with low density. In the present work, Ti/Al and …

For improving the mechanical properties of Ti-Al 3 Ti metal-intermetallic laminated (MIL), it is
of vital importance for reducing tensile thermal stresses of this composites. In this work, finite …

In this study, modified surface layers on commercially pure fine-grained titanium were
investigated after implantation with aluminum ions up to doses of 1× 10 17 and 1× 10 18 …

In this paper, the Al/Ti and Cu/Ti layered composite was prepared by the hot-pressing-
bonding technique as the basic material of the anodes, and the IrO 2-Ta 2 O 5 coatings were …

In the present research, bi-metal Ti-6Al-4 V/Al composites with and without SiC and Al2O3
reinforced were fabricated by cold rolling and post-deformation annealing. The effects of …

Metal/intermetallic laminate composites can improve the mechanical properties of
intermetallic materials using metal layers. In recent years, titanium aluminide intermetallics …

Abstract (Ti 3 Al+ TiB)/Ti composites were prepared on Ti6Al4V by laser cladding. The
microstructures of the coatings were analyzed; the high temperature wear and oxidation …