The present investigations are a comparative study of single and dual reinforcement
particles on microstructural features and wear behavior in LM-13 aluminum–silicon alloy …

The purpose of this study is to explore the effect of SiC reinforcement along with immiscible
element addition in spray formed Al–Si base alloy. The investigation is done for four different …

The effects of Bi content as a trace element on the microstructure and the solidification path
of A356. 2 alloy have been investigated. The alloys containing different Bi levels (0, 20, and …

The article deals with the use of the SPC method, specifically the DoE method–Design of
Experiment method, during evaluation of a finished area of aluminum allow AlMg3 with an …

This study investigates the feasibility of using an Al-Si eutectic alloy as a reactive fuel in
energetic mixtures. Al-Si eutectic alloy powders were obtained from secondary resources …

The experimental data on phase equilibria and thermodynamic properties of the Cd–X (X=
Sn, Mn, Fe) systems in literature was assessed by the means of the CALculation of PHAse …

Recycled aluminium alloys are made out of aluminium scrap (new or old) and workable
aluminium garbage by recycling. Due to the increasing production of recycled aluminium …

Abstract The Cd–X (X= Sr, Ti, B, V) systems have been critically reviewed and modeled by
means of the CALPHAD approach. The eight compounds, SrCd 11, SrCd 6, Sr 13 Cd 58 …

The objective of this study is to develop the mechanical properties of AlSiCu aluminum alloy
by the two-step solution heat treatment. The microstructure of gravity casting specimen …

This paper investigated the effects of two-step solution heat treatment of aluminum alloy for
lightweight automotive on mechanical properties. Solution heat treatments in this study are …