Combustion behavior and pollutant emission characteristics of polymers and biomass in a bubbling fluidized bed reactor

W Żukowski, D Jankowski, J Wrona… - Energy, 2023 - Elsevier
The paper presents the results of combustion of polymers and biomass in a bubbling
fluidized bed reactor. It was determined that 850° C is the minimum temperature at which the …

The Modification of the Perforated Plate in the Fluidized‐Bed Combustor to Analyze Heat Convection Rate and Temperature

Erdiwansyah, Mahidin, H Husin, M Faisal… - Journal of …, 2021 - Wiley Online Library
Investigation of combustion temperature through experiments with a wide range of fuels,
both solid and liquid, is continuously being conducted by scientists around the world, while …

[HTML][HTML] Reconstruct the biomass particles fields in the particle-fluid problem using continuum methods by applying the physics-informed neural network

F Darlik, B Peters - Results in Engineering, 2023 - Elsevier
The motion of particles in the moving grate combustion chamber is used as the case study.
These problems are categorized as particle-fluid problems. They are typically solved using …

Assessment of the Dimensionless Groups-Based Scale-Up of Gas–Solid Fluidized Beds

FM Zaid, H Al-Rubaye, TM Aljuwaya, MH Al-Dahhan - Processes, 2023 - mdpi.com
The most common scale-up approach for gas–solids fluidized beds is based on matching
the governing dimensionless parameters. In the literature, this approach has been validated …

[HTML][HTML] Modification of perforated plate in fluidized-bed combustor chamber through computational fluid dynamics simulation

H Husin, A Gani, R Mamat - Results in Engineering, 2023 - Elsevier
The combustion of solid fuels in a combustion chamber can be perfect if all the fuel included
can burn out, and nothing remains. The combustion chamber requires sufficient air to burn …

Influence of Porous Media Aperture Arrangement on CH4/Air Combustion Characteristics in Micro Combustor

F Wang, X Li, S Feng, Y Yan - Processes, 2021 - mdpi.com
Micro-electro-mechanical systems (MEMS) occupy an important position in the national
economy and military fields, and have attracted great attention from a large number of …

Experimental study on the FBC chamber for analysis of temperature and combustion efficiency using palm oil biomass fuel

Mahidin, Hamdani, Hisbullah… - Transactions of the …, 2022 - cdnsciencepub.com
Renewable energy sources such as palm oil biomass solid waste have attracted the interest
of scientists. This is because palm oil biomass is suitable for conversion to heat energy so …

Application of Passive Technique to Cocoa Beans Batch Dryer and Assessment of Thin Layer Models

S Tepthanee, J Taweekun… - International Journal of …, 2024 - journal.ump.edu.my
The objective of this work was to develop a hot air production system using twisted tapes
(TT) for the specific purpose of drying cocoa. The study also aimed to analyze the drying …

Comparison of Thermal Efficiency and Heat Transfer Rate on the Fluidized-Bed Combustor Using Oil Palm Fuel

M Faisal, Erdiwansyah, Muhtadin, Mahidin… - Proceedings of the 2nd …, 2022 - Springer
Waste in oil palm biomass is one of the renewable energy sources that can be converted
into energy. The availability of oil palm biomass which is a renewable energy source is …

Optimization of cd (II) removal using Aceh bentonite using box behnken design by response surface methodology

J Jakfar, K Pontas, A Azwar, FM Djuned… - AIP Conference …, 2024 - pubs.aip.org
Bentonite is one of Aceh Province's abundant and environmentally friendly natural mineral
resources, and it is used for Cd (II) ion adsorption and optimization using the Box Bentonite …