Relative humidity sensor based on an agarose-infiltrated photonic crystal fiber interferometer
We report a detailed study of a miniature optical relative humidity (RH) sensor based on a
polymer-infiltrated photonic crystal fiber interferometer. The sensor shows a high sensitivity …
polymer-infiltrated photonic crystal fiber interferometer. The sensor shows a high sensitivity …
Effect of coating thickness on the sensitivity of a humidity sensor based on an Agarose coated photonic crystal fiber interferometer
We report the effect of coating thickness on the sensitivity of a relative humidity (RH) sensor
based on an Agarose coated photonic crystal fiber interferometer for the first time. An …
based on an Agarose coated photonic crystal fiber interferometer for the first time. An …
Wavelength and phase detection based SMS fiber sensors optimized with etching and nanodeposition
The development of an optical fiber refractometer by hydrogen fluoride etching and
sputtering deposition of a thin-film of indium tin oxide on a single-mode-multimode-single …
sputtering deposition of a thin-film of indium tin oxide on a single-mode-multimode-single …
Two-dimensional vector bending sensor based on Fabry-Pérot cavities in a multicore fiber
R Oliveira, M Cardoso, AM Rocha - Optics Express, 2022 - opg.optica.org
In this work we demonstrate the fabrication and characterization of a temperature
insensitive, two-dimensional curvature sensor using a resin based Fabry-Pérot …
insensitive, two-dimensional curvature sensor using a resin based Fabry-Pérot …
Photonic crystal fiber sensor array based on modes overlapping
GA Cárdenas-Sevilla, V Finazzi, J Villatoro… - Optics express, 2011 - opg.optica.org
An alternative method to build point and sensor array based on photonic crystal fibers
(PCFs) is presented. A short length (in the 9-12 mm range) of properly selected index …
(PCFs) is presented. A short length (in the 9-12 mm range) of properly selected index …
Integrated interferometers' system for in situ real-time optical signal modulation
Improving the functionality of an optical sensor on a prefabricated platform relies heavily on
an optical signal conditioning method that actively modulates optical signals. In this work, we …
an optical signal conditioning method that actively modulates optical signals. In this work, we …
Temperature-insensitive gas pressure sensor based on photonic crystal fiber interferometer
L Chen, J Tian, Q Wu, J Li, Y Yao… - IEEE Sensors …, 2023 - ieeexplore.ieee.org
A temperature-insensitive gas pressure sensor was proposed and experimentally
investigated. This sensor was based on a photonic crystal fiber (PCF) sandwiched between …
investigated. This sensor was based on a photonic crystal fiber (PCF) sandwiched between …
[HTML][HTML] Composed multicore fiber structure for direction-sensitive curvature monitoring
The present work deals with a curvature sensor that consists of two segments of asymmetric
multicore fiber (MCF) fusion spliced with standard single mode fiber (SMF). The MCF …
multicore fiber (MCF) fusion spliced with standard single mode fiber (SMF). The MCF …
Multicore fiber-Bragg-grating-based directional curvature sensor interrogated by a broadband source with a sinusoidal spectrum
A simple, spectral-drift-insensitive interrogation scheme for a multicore fiber Bragg grating
(FBG)-based directional curvature sensor is proposed. The basic principle is to transform the …
(FBG)-based directional curvature sensor is proposed. The basic principle is to transform the …
Label-free wavelength and phase detection based SMS fiber immunosensors optimized with cladding etching
The performance of E-SMS (Etched Singlemode-Multimode-Singlemode) optical fiber
structures as immunosensors has been assessed by the implementation of antibody/antigen …
structures as immunosensors has been assessed by the implementation of antibody/antigen …