Soft-magnetic alloys exhibit exceptional functional properties that are beneficial for a variety
of electromagnetic applications. These alloys are conventionally manufactured into sheet or …

During severe plastic deformation (SPD), the processes of lattice defect formation as well as
their relaxation (annihilation) compete with each other. As a result, a dynamic equilibrium is …

FeSiBNi coatings with the Ni mass fractions of 0, 3, 6 and 9% were fabricated on S355 steel
using a laser cladded (LC). The surface and cross–section morphologies, chemical …

This review discusses an area of expertise that is at the intersection of three large parts of
materials science. These are phase transformations, severe plastic deformation (SPD), and …

Recent studies showed that structural changes in amorphous alloys under high pressure
torsion (HPT) are determined by their chemical composition and processing regimes. For …

High-pressure torsion (HPT) is a severe plastic deformation technique where a sample is
subjected to torsional shear straining under a high hydrostatic pressure. The HPT method is …

In this work, a melt-spun amorphous Fe 73.5 Si 13.5 B 9 Cu 1 Nb 3 alloy is subjected to high-
pressure torsion (HPT) treatment under 6 GPa in order to enhance the alkaline hydrogen …

Shear bands play a key role in the deformation of amorphous alloys at room, low and
elevated (below the glass transition) temperatures. The shear bands in the amorphous Al–Ni …

The influence of heat treatment and deformation on structural changes of Al-based
amorphous alloys in the amorphous state and at early stages of crystallization has been …

Fe-based amorphous alloys are promising soft magnetic materials for applications in power
electronic devices. However, the practical use is inevitably limited by their brittleness that …