This study's main goal was to obtain and characterize Al2O3-Cu-Ni composites with different
metallic phase content. The study analyzed the three series of samples differing in the …

The anodizing of AS12 alloys in various alkaline media is investigated over a large potential
range (0–600 V) in order to provide a deep understanding of the mechanisms involved and …

Resin material is currently the most widely used insulating support body component in
electromagnetic railguns. This is done to enhance the ablation resistance of the resin …

Silicon carbide reinforcement in Alumina possess better physical and mechanical properties
at elevated temperature. However, addition of second phase ceramic to matrix enhances the …

The tribological behaviour of aluminium (Al) 6061 alloy reinforced with 20% submicron (0.7
µm) alumina (Al2O3) particles has been investigated at room temperature under solid …

The aim of the work was to determine the influence of metallic phase content on the
obtained properties of hybrid composites from the ceramics-metal system. Six series of …

Tribological behavior of aluminum (Al) 6061 alloy reinforced with 20% submicron (0.7 μm)
alumina (Al2O3) particles was evaluated under dry conditions at temperatures ranging from …

The aim of this study was the fabrication and characterization of the novel hybrid composite
from the Al2O3/Cu/Ni system. The research included the production of composite specimens …

Abstract Ti (C 0.5, N 0.5)-reinforced alumina matrix composites with an addition of 2 wt% ZrO
2 were tested to determine residual stresses of Al 2 O 3 and Ti (C 0.5, N 0.5) phases. The …

Alumina-based composites have good properties such as high hardness, high chemical and
temperature stability and excellent wear resistance. The type and amount of additive as well …