Due to the preferential oxidation of Cr in various corrosion-resistant alloys, Cr-depletion
extensively forms around the oxides and impairs passivation ability. This harmful effect has …

To solve the corrosion problem of the copper plates caused by fluoride ions, the Ni55 and
CoCrNi medium-entropy alloy coatings were prepared via high-velocity oxygen fuel …

In this study, AlCoCrFeNi and AlCoCrFeNiMn0. 5 high-entropy alloy coatings, denoted as
the Mn0 and Mn0. 5 coatings, respectively, were prepared on 304 stainless steel substrate …

The passivation ability of steels with low chromium contents (4% and 6%) in a solution
representative of carbonated-cured concrete matrices was compared to conventional carbon …

Abstract Gas atomized Cr 40 Co 40 Ni 20 multi-principal element alloy (MPEA), size ranging
from 106 to 180 μm, was used as feedstock to coat carbon steel substrates by Plasma …

The development of protective coatings on copper alloy surfaces represents a critical
research direction to enable the widespread industrial application of copper alloys. To …

Abstract Multi-Principal Element Alloys (MPEA) were designed to possess good strength,
ductility, wear and corrosion resistance, and biomedical compatibility. There are many …

Three Cu-based glassy composite coatings (C1, C2, C3) were fabricated using high velocity
air-fuel (HVAF) spraying. These coatings were investigated through cavitation testing and …

To reduce the corrosion degradation of copper alloys, an equiatomic CoCrNi medium-
entropy alloy (MEA) coating was successfully fabricated on a copper alloy plate using high …

During high-temperature forming and phase change heat treatment, the steel surface is
susceptible to oxidation. This can negatively affect the surface quality of steel parts. The …