Models for wind tunnel tests based on additive manufacturing technology
W Zhu - Progress in Aerospace Sciences, 2019 - Elsevier
Wind tunnel testing is a reliable means for aircraft design. The wind tunnel models are the
objects used in the tests. The accuracy and economy of the model design and fabrication …
objects used in the tests. The accuracy and economy of the model design and fabrication …
Fatigue analysis of FDM materials
J Lee, A Huang - Rapid prototyping journal, 2013 - emerald.com
Purpose–The purpose of this paper is to determine the effects of fatigue on fused deposition
modeling rapid prototyped acrylonitrile butadiene styrene (ABS) materials …
modeling rapid prototyped acrylonitrile butadiene styrene (ABS) materials …
Aeronautics and astronautics: recent progress and future trends
R Martinez-Val, E Perez - Proceedings of the Institution of …, 2009 - journals.sagepub.com
Aeronautics and astronautics are two closely related disciplines, sometimes found under the
joint term aerospace, that have progressed at a formidable pace during the 20th century …
joint term aerospace, that have progressed at a formidable pace during the 20th century …
MHz-rate nitric oxide planar laser-induced fluorescence imaging in a Mach 10 hypersonic wind tunnel
Nitric oxide planar laser-induced fluorescence (NO PLIF) imaging at repetition rates as high
as 1MHz is demonstrated in the NASA Langley 31 in. Mach 10 hypersonic wind tunnel …
as 1MHz is demonstrated in the NASA Langley 31 in. Mach 10 hypersonic wind tunnel …
OH PLIF visualization of the UVa supersonic combustion experiment: Configuration A
Hydroxyl radical (OH) planar laser-induced fluorescence (PLIF) visualizations were
performed in the University of Virginia supersonic combustion experiment. The test section …
performed in the University of Virginia supersonic combustion experiment. The test section …
Nitric-oxide planar laser-induced fluorescence measurements in the hypersonic materials environmental test system
Planar laser-induced fluorescence of naturally occurring nitric oxide has been used to
provide insight into baseline flow conditions of the Hypersonic Materials Environmental Test …
provide insight into baseline flow conditions of the Hypersonic Materials Environmental Test …
Nitric oxide PLIF measurements in the hypersonic materials environmental test system (HYMETS)
A nonintrusive laser-based measurement system has been applied for the first time in the
HYMETS (Hypersonic Materials Environmental Test System) 400 kW arc-heated wind tunnel …
HYMETS (Hypersonic Materials Environmental Test System) 400 kW arc-heated wind tunnel …
Hypersonic laminar boundary layer velocimetry with discrete roughness on a flat plate
This material is declared a work of the US Government and is not subject to copyright
protection in the United States. spatial depth of 0.5-mm. Temperature sensitive paint (TSP) …
protection in the United States. spatial depth of 0.5-mm. Temperature sensitive paint (TSP) …
Characterization of CO2 flow in a hypersonic impulse facility using DLAS
JM Meyers, S Paris, DG Fletcher - Experiments in Fluids, 2016 - Springer
This work documents diode laser absorption measurements of CO 2 flow in the free stream
of the Longshot hypersonic impulse facility at Mach numbers ranging from 10 to 12. The …
of the Longshot hypersonic impulse facility at Mach numbers ranging from 10 to 12. The …
Development of Naphthalene PLIF for visualizing ablation products from a space capsule heat shield
NASA has continued interest in the study of ablation owing to the need to develop suitable
thermal protection systems (TPS) for spacecraft that undergo planetary entry. Ablation is a …
thermal protection systems (TPS) for spacecraft that undergo planetary entry. Ablation is a …