Investigation of microstructure and properties of strip-cast 4.5 wt% Si non-oriented electrical steel by different rolling processes
Abstract A 4.5 wt% Si as-cast strip with equiaxed grains microstructure fabricated by twin-roll
caster was subjected to three different cold rolling and final recrystallization annealing …
caster was subjected to three different cold rolling and final recrystallization annealing …
Effect of grain boundary character distribution and grain boundary phosphorus segregation on the brittleness of an interstitial-free steel
SH Song, Y Zhao, Y Cui, J Sun, H Si, JQ Li - Materials Letters, 2016 - Elsevier
Grain boundary character distribution and grain boundary P segregation in an interstitial-
free steel annealed for up to 4 h at 700° C after cold rolling are investigated using electron …
free steel annealed for up to 4 h at 700° C after cold rolling are investigated using electron …
Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I: mechanical properties and deformation textures
IF steel sheets were processed by conventional symmetric and asymmetric rolling (ASR) at
ambient temperature. The asymmetry was introduced in a geometric way using differential …
ambient temperature. The asymmetry was introduced in a geometric way using differential …
Texture and grain growth characteristics in a boron added interstitial free steel after severe cold rolling and annealing
A boron added interstitial free steel was cold rolled (CR) 90% and 98%, followed by batch
annealing for different lengths of time at 650° C. Crystallographic textures were determined …
annealing for different lengths of time at 650° C. Crystallographic textures were determined …
The Growth of {1 1 h}<1 2 1/h> (α*-Fiber) Grains and the Evanesce of {001}<100> (Cube) Grains During the Recrystallization of Warm Rolled Fe-6.5 Wt Pct Si Non …
H Xu, Y He, X Shu, Y Xu, S Yue - Metallurgical and Materials Transactions …, 2024 - Springer
//ND (normal direction) texture (including the cube,{001}< 100>) is a desired final texture in
non-oriented electrical steel (NOES) due to the alignment of two magnetically easy< 100> …
non-oriented electrical steel (NOES) due to the alignment of two magnetically easy< 100> …
Effect of flash processing on recrystallization behavior and mechanical performance of cold-rolled IF steel
Flash processing (FP) has attracted considerable attention due to its high efficiency,
economic advantages, and the extraordinary opportunity if offers to improve the mechanical …
economic advantages, and the extraordinary opportunity if offers to improve the mechanical …
Systematic investigation of the texture evolution of Cu-Ni alloys with different strains
H Tian, H Suo, Y Ji, X Wang, L Ma, L Wang… - Journal of Alloys and …, 2022 - Elsevier
In this study, the texture evolution of CuNi alloy fabricated by rolling and annealing
processes with different von Mises strains was systematically investigated by electron …
processes with different von Mises strains was systematically investigated by electron …
Asymmetric rolling of interstitial-free steel using differential roll diameters. Part II: microstructure and annealing effects
The effects of annealing on the microstructure, texture, tensile properties, and R value
evolution of an IF steel sheet after room-temperature symmetric and asymmetric rolling were …
evolution of an IF steel sheet after room-temperature symmetric and asymmetric rolling were …
Development of texture, microstructure, and grain boundary character distribution in a high-strength boron-added interstitial-free steel after severe cold rolling and …
A high-strength boron-added interstitial-free (IF) steel was subjected to cold rolling by 90
and 98ápct. Both these materials were subjected to annealing at 650á░ C and 700á░ C for …
and 98ápct. Both these materials were subjected to annealing at 650á░ C and 700á░ C for …
Microstructure and Crystallographic Texture Evolution during Isothermal Annealing of Cold-Rolled Fe-6.8 Al Low-Density Steel
S Pramanik, S Suwas - Journal of Materials Engineering and Performance, 2022 - Springer
In the present work, the microstructural evolution in heavily cold-rolled and annealed Fe-6.8
Al low-density steel has been studied. The evolution of texture with a strong component …
Al low-density steel has been studied. The evolution of texture with a strong component …