The micro-and macroscopic fatigue crack growth (FCG) rates of a wide class of structural
materials were analyzed and it was concluded that both rates coincide either during high …

The in-service cracks of the continuous casting machine roll are studied. The effects of high
temperature fatigue crack growth were investigated for 25Kh1M1F steel, which is widely …

Main laws of influence of stress ratio on fatigue crack growth rate in the material of railway
axles were revealed and statistical distributions of characteristics of cyclic crack's resistance …

The influence of gradients in hardness and elastic properties at interfaces of dissimilar
materials in laminated metallic composites (LMCs) on fatigue crack propagation is …

In the paper, the study of the impact toughness of 12Cr1MoV steel Charpy specimens at the
temperature range from 20° C to 600° C is presented. It was revealed that the increase of the …

The evaluation of crack initiation and growth at microscopic scale is a crucial issue for the
safety assessment of macroscopical fractures. In the present paper, the crack propagation in …

The structure and mechanical properties of the 09Mn2Si high-strength low-alloyed steel
after the five-stage helical rolling (HR) were studied. It was revealed that the fine-grained …

High-temperature components in power plants may fail due to creep and fatigue. Creep
damage is usually accompanied by the nucleation, growth, and coalescence of grain …

A plane strain problem for a periodic set of the limited electrically and magnetically
permeable cracks is considered in this work. The tensile mechanical stress, magnetic …

Highlights•Stage-like nature of the fatigue crack propagation in the bimetallic specimen into
macro-, meso-, and micro-levels is determined.•It is found that 10 s hold under the maximum …