Cubic equations of state (CEoSs) are extensively used in academia and industry for their
consistency, reliability, even under extrapolation conditions, and capacity to predict phase …

Abstract The Patel-Teja equation of state (PT EOS) is extensively researched, modified, and
applied three-parameter cubic equation of state for the prediction of volumetric and …

Direct air capture (DAC) is increasingly seen as a critical technology to reach mid-century
net-zero targets and limit climate change to well below 2° C. While the commercialization of …

The effects of Mo and Nb additions on the microstructure and mechanical properties of two
FeCrAl alloys were studied. Fine and uniform recrystallized grain structures (~ 20–30 μm) …

The van der Waals (vdW) equation of state has long fascinated researchers and engineers,
largely because of its simplicity and engineering flexibility. At the same time as vdW and …

In the last two centuries, equations of state (EoSs) have become a key tool for the correlation
and prediction of thermodynamic properties of fluids. They not only can be applied to pure …

To accurately predict saturation pressures for gas (es)-heavy oil/bitumen-water systems,
several α functions have been selected and evaluated at a reduced temperature (Tr) of 0.70 …

The conventional cubic‒plus‒association equation of state (CPA EoS) is extended to
describe the phase behavior of non‒associating and associating fluids in nanopores. To …

The prediction of solvation quantities is an important issue in several fields of chemical and
process engineering. In this regard, this work was conducted to increase the prediction …

The SAFT and cubic models are often compared in the open literature. Usually, limitations
and strengths of both types of equations of state (EoSs) are ascribed to their theoretical …