[HTML][HTML] Cold-sprayed coatings: Microstructure, mechanical properties, and wear behaviour
P Poza, MÁ Garrido-Maneiro - Progress in Materials Science, 2022 - Elsevier
Deposition of coatings on the surface of a bulk material is a versatile, economical, and
effective strategy to provide additional features to the bulk material, mainly to improve its …
effective strategy to provide additional features to the bulk material, mainly to improve its …
A review of the mechanical and tribological behavior of cold spray metal matrix composites
Cold spray is an effective solid-state process for the fabrication of metal matrix composites
where metallic, ceramic, or intermetallic reinforcements are embedded in a metallic matrix …
where metallic, ceramic, or intermetallic reinforcements are embedded in a metallic matrix …
Tribological performance of high-entropy coatings (HECs): a review
Surface coatings that operate effectively at elevated temperatures provide compatibility with
critical service conditions as well as improved tribological performance of the components …
critical service conditions as well as improved tribological performance of the components …
Advances in thermally sprayed WC-based wear-resistant coatings: Co-free binders, processing routes and tribological behavior
A growing understanding of wear behavior of various thermally sprayed ceramic–metallic
matrix coatings has occurred over recent years. This has resulted from the continuous …
matrix coatings has occurred over recent years. This has resulted from the continuous …
On the PEO treatment of cold sprayed 7075 aluminum alloy and its effects on mechanical, corrosion and dry sliding wear performances thereof
Y Rao, Q Wang, D Oka, CS Ramachandran - Surface and Coatings …, 2020 - Elsevier
The plasma electrolytic oxidation (PEO) process was used to deposit an alumina coating on
a cold sprayed 7075 aluminum alloy to improve the surface properties. The phase …
a cold sprayed 7075 aluminum alloy to improve the surface properties. The phase …
High temperature friction and wear behavior of cold-sprayed Ti6Al4V and Ti6Al4V-TiC composite coatings
The poor wear resistance of titanium and its alloys often results in galling and high wear
rates. One method to improve their wear resistance is by hard secondary phase …
rates. One method to improve their wear resistance is by hard secondary phase …
Room and elevated temperature sliding wear behavior of cold sprayed Ni-WC composite coatings
TB Torgerson, MD Harris, SA Alidokht… - Surface and Coatings …, 2018 - Elsevier
The tribological properties of cold sprayed Ni-WC metal matrix composite (MMC) coatings
were investigated under dry sliding conditions from room temperature (RT) up to 400° C …
were investigated under dry sliding conditions from room temperature (RT) up to 400° C …
Microstructure and tribological properties of cold sprayed WCp/Ti composite coatings on Ti6Al4V titanium alloy
Y Xu, J Ge, W Li - Tribology International, 2024 - Elsevier
In this study, WC p/Ti composite coatings with the WC proportions of 30.1–44.1 vol% were
cold sprayed using powders with WC proportions of 40–80 vol%. Coatings are well bonded …
cold sprayed using powders with WC proportions of 40–80 vol%. Coatings are well bonded …
Adhesion strength of titanium particles to alumina substrates: A combined cold spray and LIPIT study
The cold spray process and laser-induced projectile impact test (LIPIT) are used to deposit
Ti powder particles on sintered polycrystalline Al 2 O 3. Whereas LIPIT allows real-time …
Ti powder particles on sintered polycrystalline Al 2 O 3. Whereas LIPIT allows real-time …
The role of metal powder properties on the tribology of cold sprayed Ti6Al4V-TiC metal matrix composites
VNV Munagala, RR Chromik - Surface and Coatings Technology, 2021 - Elsevier
Abstract Ti6Al4V-TiC metal matrix composite (MMC) coatings were cold sprayed using
spherical and irregular Ti6Al4V powders manufactured with plasma gas atomization and the …
spherical and irregular Ti6Al4V powders manufactured with plasma gas atomization and the …