The application of carbides in catalysis, batteries, aerospace fields, etc. has been
continuously expanded and deepened, which is attributed to the diversified physicochemical …

The main aim of this two-part article is to present and arrange the collected important
information on widely applicable Ni-based self-fluxing alloy coatings and to point to the …

The objective of the current experimental study is to investigate influence of dissimilar
welding between 316 L Austenitic and 202 Austenitic Stainless Steel. This is achieved …

Abstract Two hypereutectic Fe-Cr-C hardfacing alloys were manufactured, whose Nb
contents are 0 and 1.2 wt% respectively. Their phase precipitation curves were calculated by …

Abstract In this research,(AlCoCrFeNiSi) 100-x (WC) x (x= 0, 20 and 40 wt%) high entropy
alloy (HEA) coatings were successfully deposited on the surface of Q235 steel substrate …

Industrial applications suffer from abrasive wear in lubricated contacts. Three-body abrasive
experiments were conducted on three hard coatings with application in oil and gas industry …

The aim of the current study was to investigate erosive and impact/abrasive wear behaviour
of TiC–NiMo and Cr 3 C 2–Ni reinforced NiCrBSi hardfacings at temperatures up to 700° C …

Hardfacing by laser provides a cost-effective option for protecting components against
mechanical wear and corrosion. In the present work, high speed steel hardfacings were …

TiC/WC composite ceramics reinforced Ni-based coating was manufactured on the mild
steel via PTA technology. Different WC/TiC mass ratio schemes were designed and the total …

Plasma transferred arc (PTA) cladding was used to produce composite coatings on the
surface of AISI 5115 steel using five different energy inputs and ferrochromium (FeCrC) …