As expected from the alloy design procedure, combined twinning-induced plasticity and
transformation-induced plasticity effects are activated in a metastable β Ti–12 wt.% Mo alloy …

A ternary β-metastable titanium Ti–9Mo–6W (wt.%) was designed. A very high work
hardening rate close to 2100 MPa and a uniform deformation larger than 35% were …

Grain size effect on superelasticity was investigated in Ti-20Zr-3Mo-3Sn alloys for the same
crystallographic texture and for a broad grain size range from 7 μm to 180 μm. The …

Although using elemental powder mixtures may provide broad alloy selection at low cost for
selective laser melting (SLM), there is still a concern on the resultant microstructural and …

The composition dependences of transformation strain and shape memory, and superelastic
properties were extensively investigated in Ti–Nb–Zr and Ti–Nb–Ta alloys in order to …

Attributed to their excellent strength, toughness, hardness, wear resistance and corrosion
resistance, some Ti-rich high entropy alloys (HEAs) and medium entropy alloys (MEAs) are …

In this study, a new Ti–Zr–Nb–Sn alloy system was developed as Ni-free biomedical
superelastic alloys with a large recovery strain and excellent biocompatibility. Ti–18Zr–(9 …

While ω precipitates in metastable β titanium alloys are typically considered embrittling and
consequently deleterious to the mechanical properties, this paper demonstrates that low …

In this study, the microstructure and the mechanical properties of two new biocompatible
superelastic alloys, Ti–24Nb–0.5 O and Ti–24Nb–0.5 N (at.%), were investigated. Special …

A flash-thermal treatment technique has been developed very recently to improve both the
critical stress to induce the martensitic transformation (MT) and the recoverable deformation …