A state-of-the-art review on solid-state metal joining
This paper aims at providing a state-of-the-art review of an increasingly important class of
joining technologies called solid-state (SS) welding, as compared to more conventional …
joining technologies called solid-state (SS) welding, as compared to more conventional …
Lightweight metal laminated plates produced via (hot, cold and cryogenic) roll bonding: A review
Due to the comprehensive advantages of various metals, metal laminates have been paid
much attention. Roll bonding method has become one of the main fabrication methods of …
much attention. Roll bonding method has become one of the main fabrication methods of …
Explosive welding of aluminium to stainless steel
G Carvalho, I Galvão, R Mendes, RM Leal… - Journal of Materials …, 2018 - Elsevier
Explosive welds of stainless steel and aluminium could only be achieved with the steel
positioned as the baseplate. Using stainless steel as the flyer plate, the tensile stresses …
positioned as the baseplate. Using stainless steel as the flyer plate, the tensile stresses …
High-velocity impact welding process: a review
H Wang, Y Wang - Metals, 2019 - mdpi.com
High-velocity impact welding is a kind of solid-state welding process that is one of the
solutions for the joining of dissimilar materials that avoids intermetallics. Five main methods …
solutions for the joining of dissimilar materials that avoids intermetallics. Five main methods …
Microstructural evolutions and its impact on the corrosion behaviour of explosively welded Al/Cu bimetal
In this study, the microstructural evolutions and corrosion resistance of aluminium/copper
joint fabricated through explosive welding process have been thoroughly investigated, while …
joint fabricated through explosive welding process have been thoroughly investigated, while …
Influence of laser offset on laser welding-brazing of Al/brass dissimilar alloys
Laser welding-brazing of dissimilar metals 5052 aluminum alloy and H62 brass in butt
configuration was performed with Zn-15% Al filler metal. Laser beam offset was defined as …
configuration was performed with Zn-15% Al filler metal. Laser beam offset was defined as …
Interface morphology and mechanical properties of Al-Cu-Al laminated composites fabricated by explosive welding and subsequent rolling process
MM Hoseini-Athar, B Tolaminejad - Metals and Materials International, 2016 - Springer
Explosive welding is a well-known solid state method for joining similar and dissimilar
materials. In the present study, tri-layered Al-Cu-Al laminated composites with different …
materials. In the present study, tri-layered Al-Cu-Al laminated composites with different …
Correlation of surface Volta potential with galvanic corrosion initiation sites in solid-state welded Ti-Cu bimetal using AFM-SKPFM
This study aims to correlate the microstructure and Volta potential distribution of Ti-Cu
welded bimetal to its corrosion initiation sites, using AFM-SKPFM, and SEM-EDS. Local …
welded bimetal to its corrosion initiation sites, using AFM-SKPFM, and SEM-EDS. Local …
Formation of intermetallic structures at the interface of steel-to-aluminium explosive welds
G Carvalho, I Galvão, R Mendes, RM Leal… - Materials …, 2018 - Elsevier
The formation of intermetallic structures at the interface of carbon steel to 6082 aluminium
alloy explosive welds and their influence on the weldability of these two materials were …
alloy explosive welds and their influence on the weldability of these two materials were …
Effect of the flyer material on the interface phenomena in aluminium and copper explosive welds
G Carvalho, R Mendes, RM Leal, I Galvão, A Loureiro - Materials & Design, 2017 - Elsevier
The effect of physical and mechanical properties of three different flyers on the interface
phenomena of partially overlapped explosive welds, using the same base plate material …
phenomena of partially overlapped explosive welds, using the same base plate material …