[HTML][HTML] Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives
Biodegradable metals (BMs) gradually degrade in vivo by releasing corrosion products once
exposed to the physiological environment in the body. Complete dissolution of …
exposed to the physiological environment in the body. Complete dissolution of …
Tailoring microstructural evolution and fracture damage behavior of a Mg–Y–Zn alloy during hot tensile deformation
X Chen, Y Lu, M Ning, X Zhou, J Chen - Materials Science and …, 2023 - Elsevier
Hot tensile tests are employed herein to explore the microstructural evolution and fracture
damage of a hot–extruded Mg-9.1 Y-1.8 Zn (wt%) alloy at deformation temperatures of 250 …
damage of a hot–extruded Mg-9.1 Y-1.8 Zn (wt%) alloy at deformation temperatures of 250 …
Effect of varying TiB2 reinforcement and its ageing behaviour on tensile and hardness properties of in-situ Al-4.5% Cu-xTiB2 composite
The objective of this study is to understand the suitability of mixed salt route using stir casting
technique to fabricate in-situ Al-4.5% Cu-xTiB 2 (x= 3, 6, 9 and 12 wt%) composites. The …
technique to fabricate in-situ Al-4.5% Cu-xTiB 2 (x= 3, 6, 9 and 12 wt%) composites. The …
Extended finite element simulation on Tensile, fracture toughness and fatigue crack growth behaviour of additively manufactured Ti6Al4V alloy
R Verma, P Kumar, R Jayaganthan, H Pathak - Theoretical and Applied …, 2022 - Elsevier
The mechanical properties such as tensile, fracture toughness, and fatigue properties of
Additive Manufacturing (AM) fabricated Ti6Al4V alloy is critically crucial for structural …
Additive Manufacturing (AM) fabricated Ti6Al4V alloy is critically crucial for structural …
Effect of aging treatment on the microstructure, fracture toughness and fracture behavior of the extruded Mg-7Gd-2Y–1Zn-0.5 Zr alloy
ZK Ji, XG Qiao, CY Hu, L Yuan, FG Cong… - Materials Science and …, 2022 - Elsevier
A commercial scale Mg-7Gd-2Y–1Zn-0.5 Zr alloy extrusion rod with synergetic high yield
strength of 350 MPa and fracture toughness K IC of 22.4 MPa m 1/2 was fabricated by direct …
strength of 350 MPa and fracture toughness K IC of 22.4 MPa m 1/2 was fabricated by direct …
Influence of Zn addition on the microstructure, tensile properties and work-hardening behavior of Mg-1Gd alloy
J Zhao, B Jiang, Y Yuan, A Tang, H Sheng… - Materials Science and …, 2020 - Elsevier
Microstructures, tensile properties and work-hardening behavior of extruded Mg-1Gd-xZn
(x= 0, 0.5, 1.0, 1.5, wt.%) alloy sheets were investigated in the present work. All the extruded …
(x= 0, 0.5, 1.0, 1.5, wt.%) alloy sheets were investigated in the present work. All the extruded …
Microstructure and mechanical properties of Mg-Gd-Y-Zn-Mn alloy sheets processed by large-strain high-efficiency rolling
K Wang, J Wang, X Peng, S Gao, H Hu, L Zeng… - Materials Science and …, 2019 - Elsevier
Abstract The high-performance Mg-8.8 Gd-3.4 Y-1Zn-0.8 Mn (wt%) alloy sheets were
prepared by large-strain high-efficiency rolling process. The large strains with~ 87% and …
prepared by large-strain high-efficiency rolling process. The large strains with~ 87% and …
Microstructure, texture evolution and mechanical anisotropy of Mg-Gd-Y-Zn-Zr alloy sheets produced by unidirectional and cross rolling
Y Han, S Chen, Y Wan, C Liu, Z Chen - Materials Science and Engineering …, 2024 - Elsevier
The unidirectional rolling (UR) and cross rolling (CR) were used to process the Mg-4.7 Gd-
3.4 Y-1.2 Zn-0.5 Zr (wt.%) alloy sheets. The effect of rolling routes on microstructure, texture …
3.4 Y-1.2 Zn-0.5 Zr (wt.%) alloy sheets. The effect of rolling routes on microstructure, texture …
Non-destructive corrosion study on a magnesium alloy with mechanical properties tailored for biodegradable cardiovascular stent applications
Abstract An Mg-2Zn-0.6 Zr-0.6 Nd alloy for biodegradable cardiovascular stent applications
was prepared through indirect extrusion. The alloy exhibited a superior combination of …
was prepared through indirect extrusion. The alloy exhibited a superior combination of …
Mechanical response of friction stir butt weld Al-4.5% Cu/TiB2/2.5 p in situ composite: Statistical modelling and optimization
The current investigation discusses the effectiveness of stir casting technique using the
mixed salt route and friction stir butt welding (FSW) process for fabrication and joining of in …
mixed salt route and friction stir butt welding (FSW) process for fabrication and joining of in …