[HTML][HTML] New switching gate diverter valve for large flow measurement systems

I Albaina, GA Esteban, I Bidaguren… - Flow Measurement and …, 2023 - Elsevier
Testing water meters is essential for efficient management of water resources, and
compliance with regulations, water utilities should have a regular testing schedule to ensure …

Estimation of flow rate through analysis of pipe vibration

SK Venkata, BR Navada - acta mechanica et automatica, 2018 - sciendo.com
In this paper, implementation of soft sensing technique for measurement of fluid flow rate is
reported. The objective of the paper is to design an estimator to physically measure the flow …

Physico-Mechanical Metrology: Part IV: Force, Pressure and Flow Metrology

S Yadav, SSK Titus, R Kumar, I Elizabeth… - Metrology for Inclusive …, 2020 - Springer
Accurate and precise measurements of physico-mechanical quantities, such as Force,
Torque, Hardness, Pressure, Vacuum and Fluid Flow are extremely important and crucial in …

A flow stability evaluation method based on flow-pressure correlation

T Meng, S Fan, C Wang, H Shi, X Li - Flow Measurement and …, 2018 - Elsevier
For the difficulty in evaluating the flow stability of flow standard facility, a measuring method
base on the relationship analysis of flow rate and pressure is presented. It can obtain the …

[PDF][PDF] Water Flow Measurement-Based Data Acquisition Using Arduino Microcontroller and PLX-DAQ Software

B Maharmi, B Widyastomo… - Jurnal Ilmiah Teknik Elektro …, 2022 - researchgate.net
The data acquisition for monitoring the water flows in real-time, which is available at any
time, is needed for water management purposes. This paper aims to build a prototype of a …

Study on the influences of multiple parameters with uncertainty in the clamp-on ultrasonic flowmeter

H Shi, X Kang, S He, T Meng - IEEE Access, 2020 - ieeexplore.ieee.org
For a clamp-on ultrasonic flowmeter based on transit-time differential method, the flow rate
calculation model with flow velocity correction is established and verified by experiments …

Design and development for amelioration of primary water flow standard and calibration systems

SK Jaiswal, C Singh, S Kumar, A Varshney… - Flow Measurement and …, 2022 - Elsevier
The present study outlines the efforts made to improve national primary water flow standards
and calibration systems through design and development. The facility has been designed …

Automatic Piston-Type Flow Standard Device Calibration System

X Song, X Wang, M Ma - Mathematics, 2023 - mdpi.com
Measurement of flow is crucial for assuring product quality, increasing manufacturing
effectiveness, and promoting the development of science and technology. With the …

A soft sensor for estimation of in-flow rate in a flow process using pole placement and Kalman filter methods

BR Navada, SK Venkata, S Rao - Machines, 2019 - mdpi.com
This article reports the design of a soft sensor for estimation of in-flow to the control valve in
a flow process. The objective of the proposed work is to design and compare the …

Isothermal Vapor–Liquid Equilibrium Measurements for Alcohol + Water/n-Hexane Azeotropic Systems Using Both Dynamic and Automated Static-Synthetic Methods

K Moodley, P Naidoo, JD Raal… - Journal of Chemical & …, 2019 - ACS Publications
Isothermal vapor–liquid equilibrium measurements (pressure–temperature–liquid and vapor
composition) were conducted for water (1)+ propan-1-ol (2), n-hexane (1)+ butan-2-ol (2) …