As important structural materials widely used in aerospace and automotive industries,
aluminum alloys are perfect candidates for development of laser metal additive …

Research on powder-based additive manufacturing of aluminium alloys is rapidly
increasing, and recent breakthroughs in printing of defect-free parts promise substantial …

The combination of refined microstructures (induced by rapid cooling) and melt pool-
induced mesostructures in AlSi10Mg fabricated using laser powder bed fusion (LPBF)–a …

Existing additively manufactured aluminum alloys exhibit poor creep resistance due to
coarsening of their strengthening phases and refined grain structures. In this paper, we …

This paper aims at assessing microstructure/processing route/mechanical property
correlation of a high-strength TiB 2/Al–Cu–Mg–Ag aluminum alloy, namely A205 alloy …

In this study, seven AlSi10Mg bulks with different construction angles (0°, 15°, 30°, 45°, 60°,
75°, and 90°) were fabricated by selective laser melting (SLM). The effects of different …

AlSi10Mg components produced by laser powder bed fusion (LPBF) typically exhibit higher
strength but lower ductility than those made by conventional mature processing …

In the metallic components fabricated by the emerging selective laser melting (SLM)
technology, most strategies used for strengthening the materials sacrifice the ductility …

In general, melt pool boundary (MPB) characteristics and Si morphologies have strong
influences on micro-macroscopic plastic behavior and fracture mode. They are the main …

Both additively-manufactured and cast metals are known to exhibit stochastic mechanical
properties at the macroscopic level. Using a robot-assisted mechanical testing system, more …