Electrodeposition and properties of binary and ternary cobalt alloys with molybdenum and tungsten
Electrodeposition of binary and ternary coatings Co-Mo, Co-W and Co-Mo-W from bi-ligand
citrate-pyrophosphate electrolyte has been investigated. The effect of both current density …
citrate-pyrophosphate electrolyte has been investigated. The effect of both current density …
3D printing of ductile equiatomic Fe-Co alloy for soft magnetic applications
Abstract The equiatomic Fe-Co alloy is an ideal soft magnetic material due to the
combination of high saturation magnetization, permeability and low coercivity it offers. The …
combination of high saturation magnetization, permeability and low coercivity it offers. The …
In-depth characterization of as-deposited and annealed Fe-W coatings electrodeposited from glycolate-citrate plating bath
Abstract Fe-W coatings with 4, 16 and 24 at.% of W were electrodeposited under
galvanostatic conditions from a new environmental friendly Fe (III)-based glycolate-citrate …
galvanostatic conditions from a new environmental friendly Fe (III)-based glycolate-citrate …
Electrodeposition of Fe–W alloys from citrate bath: Impact of anode material
SS Belevskii, VV Danilchuk, AV Gotelyak… - Surface Engineering …, 2020 - Springer
The effect of the anode material on the rate of electrodeposition of Fe− W alloy coatings from
a citrate bath is studied. Both Fe and Ni soluble anodes and Pt and graphite insoluble …
a citrate bath is studied. Both Fe and Ni soluble anodes and Pt and graphite insoluble …
Effect of dispersed particles of aluminum oxide on the degree of defects of the crystalline structure of the chromium coating
B Mardonov, Z Oripov, R Muminov… - E3S Web of …, 2023 - e3s-conferences.org
The paper investigated dependence of the defect of the chromic coating crystal structure
containing aluminium oxide microsarches on the current density. The results are presented …
containing aluminium oxide microsarches on the current density. The results are presented …
Composition and corrosion behavior of iron-cobalt-tungsten
Principles of three component Iron-Cobalt-Tungsten alloys electrodeposition from complex
Fe (III) based citrate electrolytes are discussed. It is shown, that deposition of ternary alloys …
Fe (III) based citrate electrolytes are discussed. It is shown, that deposition of ternary alloys …
[PDF][PDF] Investigation of structure and wear resistance of nanocomposite coating of chemical nickel
V Safonov, S Shishurin, P Gorbushin… - Tribology in …, 2018 - pdfs.semanticscholar.org
The investigation results of the structure and wear resistance of composite chemical
coatings on the nickel base obtained by means of mutual codeposition with nanodispersed …
coatings on the nickel base obtained by means of mutual codeposition with nanodispersed …
Nanostructured functional coatings of iron family metals with refractory elements
Abstract Principles of Fe-Co-W, Fe-Co-Mo, and Co-Mo-Zr alloys' electrodeposition from
complex based on Fe (III) citrate and citrate-pyrophosphate electrolytes are discussed. It is …
complex based on Fe (III) citrate and citrate-pyrophosphate electrolytes are discussed. It is …
Influence of current density and W concentration on Co–W alloys used as catalysts in electrodes for Li–O2 batteries
JM Costa, TC de Morais Nepel, AF de Almeida Neto - Chemical Papers, 2019 - Springer
In this study, we verified the influence of tungsten (W) concentrations and current density for
the electroplating of the cobalt–tungsten (Co–W) alloy on two substrates (nickel foam and …
the electroplating of the cobalt–tungsten (Co–W) alloy on two substrates (nickel foam and …
Corrosion and mechanical properties of nanostructure electrolytic Co-W and Fe-Co-W alloys
It has been shown that the corrosion-electrochemical behavior of coatings with iron (cobalt)
tungsten alloys depends on the content of the refractory component, and an increase in …
tungsten alloys depends on the content of the refractory component, and an increase in …