The field of metallurgy has greatly benefited from the development of electron microscopy
over the last two decades. Scanning electron microscopy (SEM) has become a powerful tool …

The deformation microstructure of austenitic Fe-18Cr-(10-12) Ni (wt pct) alloys with low
stacking fault energies, estimated by first-principles calculations, was investigated after cold …

A non-equiatomic Fe 50 Mn 30 Co 10 Cr 10 alloy was prepared by laser cladding, and the
effects of boron addition on the microstructure, hardness and abrasive wear-resistance were …

To elucidate the characteristics of the nucleation and transformation of deformation-induced
martensitic transformation, detailed characterisations were performed during quasi-in-situ …

Structural and phase transformations occurring due to the supersaturation of austenite with
interstitial atoms (carbon and/or nitrogen) are the key priority in the study of AISI 300 series …

Two lean duplex stainless steels with different manganese contents (4 and 8 wt.%) were
deformed in the tensile mode in the temperature range of 25–300° C. The deformation …

In order to understand the mechanism of substitution for nickel with manganese in
metastable austenitic stainless steels 14Cr10Mn and 16Cr6Mn, the transformation behavior …

The microstructure of martensite formed athermally or via deformation in Fe-Cr-Ni alloys with
different austenite (γ) stability has been investigated using microscopy. Two different types of …

Variant selection during the martensitic transformation in steels may play an important role in
determining the transformation kinetics and the resulting mechanical properties. In this …

Hydrocarbons fuel our economy. Furthermore, intermediate goods and consumer products
are often hydrocarbon-based. Beside all the progress they made possible, hydrogen …