Additive manufacturing post-processing treatments, a review with emphasis on mechanical characteristics
Additive manufacturing (AM) comes in various types of technologies and comparing it with
traditional fabrication methods provides the possibility of producing complex geometric parts …
traditional fabrication methods provides the possibility of producing complex geometric parts …
[HTML][HTML] Insights into flexural and impact properties of polymer based materials printed through fused filament fabrication: Progress in the last decade
Abstract The Fused Filament Fabrication is an economic 3D printing process to produce
lightweight polymers-based structures. Therefore, it is drawing a consistently increasing …
lightweight polymers-based structures. Therefore, it is drawing a consistently increasing …
Optimization of printing parameters to maximize the mechanical properties of 3D-printed PETG-based parts
Fused filament fabrication (FFF) is the most popular additive manufacturing method, which
allows the production of highly complex three-dimensional parts with minimal material …
allows the production of highly complex three-dimensional parts with minimal material …
Multi-functional polyamide 12 (PA12)/multiwall carbon nanotube 3D printed nanocomposites with enhanced mechanical and electrical properties
Inducing electrical properties in thermoplastic materials and enhancing their mechanical
properties with the addition of nanofiller in Fused Filament Fabrication (FFF) is the main …
properties with the addition of nanofiller in Fused Filament Fabrication (FFF) is the main …
Additive manufacturing of multifunctional polylactic acid (PLA)—Multiwalled carbon nanotubes (MWCNTs) nanocomposites
In this work, an industrially scalable method was developed for the preparation of
multifunctional nanocomposite filaments. Polylactic Acid (PLA) polymer matrix was enriched …
multifunctional nanocomposite filaments. Polylactic Acid (PLA) polymer matrix was enriched …
Strain rate sensitivity of polycarbonate and thermoplastic polyurethane for various 3D printing temperatures and layer heights
In this work, strain rate sensitivity was studied for 3D-printed polycarbonate (PC) and
thermoplastic polyurethane (TPU) materials. Specimens were fabricated through fused …
thermoplastic polyurethane (TPU) materials. Specimens were fabricated through fused …
[HTML][HTML] The effects of thermal annealing on the performance of material extrusion 3D printed polymer parts
This article presents the effects of thermal annealing at elevated temperatures (> glass
transition temperature T g) on the performance of polymer parts via material extrusion 3D …
transition temperature T g) on the performance of polymer parts via material extrusion 3D …
[HTML][HTML] Enhanced tensile strength of acrylonitrile butadiene styrene composite specimens fabricated by overheat fused filament fabrication printing
TQ Tran, C Canturri, X Deng, CL Tham… - Composites Part B …, 2022 - Elsevier
In this study, we apply a simple but effective method to enhance tensile strength of carbon
fiber (CF)/acrylonitrile butadiene styrene (ABS) and glass fiber (GF)/ABS specimens via …
fiber (CF)/acrylonitrile butadiene styrene (ABS) and glass fiber (GF)/ABS specimens via …
Mechanical response assessment of antibacterial PA12/TiO2 3D printed parts: parameters optimization through artificial neural networks modeling
This study investigates the mechanical response of antibacterial PA12/TiO2 nanocomposite
3D printed specimens by varying the TiO2 loading in the filament, raster deposition angle …
3D printed specimens by varying the TiO2 loading in the filament, raster deposition angle …
The effect of physical aging and degradation on the re-use of polyamide 12 in powder bed fusion
B Sanders, E Cant, H Amel, M Jenkins - Polymers, 2022 - mdpi.com
Powder bed fusion (PBF) is an additive manufacturing (AM) technique which offers efficient
part-production, light-weighting, and the ability to create complex geometries. However …
part-production, light-weighting, and the ability to create complex geometries. However …