Friction stir welding and processing enabled the creation of stronger joints, novel ultrafine-
grained metals, new metal matrix composites, and multifunctional surfaces at user-defined …

The dynamic recrystallization (DRX) phenomena occurring in different thermo-mechanical
processing (TMP) conditions for various metallic materials are reviewed. Several types of …

Although the present edition of Fundamentals of Creep in Metals and Alloys remains broadly
up to date for metals, there are a range of improvements and updates that are either …

Microstructural characteristics of friction stir processed (FSP) 7075 Al samples in different
regions behind the pin tool were investigated. Furthermore, the microstructure evolutions …

Although hot working had been defined as deformation above the recrystallization
temperature (determined after cold working), it was only about 1965 that dynamic …

Creep of materials is classically associated with time-dependent plasticity under a fixed
stress at an elevated temperature, often greater than roughly 0.5 Tm, where Tm is the …

This reference provides descriptions on techniques relating to the hot deformation of
aluminum alloys. It provides detailed explanations on how this process relates to creep …

Dynamic recrystallisation (DRX) usually occurs during hot forming of metallic materials,
significantly impacting the mechanical properties of the final parts. Although DRX has been …

Hot deformation behavior and microstructure evolution rule of as-extruded 7075 aluminum
alloy have been investigated based on the thermal compression experiment and …

Dislocation mobility upsurge usually causes significant improvement in the plasticity of
crystalline solids, partly through its ability to deter crack formation. Dynamic recrystallization …