[HTML][HTML] Stability of twins in Mg alloys–a short review
In this article, the stability of twins, especially {10–12} twins, in Mg alloys was critically
reviewed. In the last decade, pre-twinning is considered to be an effective method for …
reviewed. In the last decade, pre-twinning is considered to be an effective method for …
Inoculation treatment of an additively manufactured 2024 aluminium alloy with titanium nanoparticles
Considerable studies on metal selective laser melting (SLM) have proved the necessity to
refine microstructure parts fabricated by SLM in order to eliminate property anisotropy, hot …
refine microstructure parts fabricated by SLM in order to eliminate property anisotropy, hot …
[HTML][HTML] Achieving enhanced plasticity of magnesium alloys below recrystallization temperature through various texture control methods
Owing to the hexagonal close-packed (HCP) crystal structure of magnesium alloys, they are
characterized by poor plasticity at low temperatures (below recrystallization temperature) …
characterized by poor plasticity at low temperatures (below recrystallization temperature) …
Quantitative analysis on light elements solution strengthening in pure titanium sintered materials by Labusch model using experimental data
S Kariya, M Fukuo, J Umeda, K Kondoh - Materials Transactions, 2019 - jstage.jst.go.jp
Solid solution strengthening effect by oxygen (O) and nitrogen (N) atoms of α-titanium (Ti)
materials was quantitatively evaluated using Labusch model by consideration of the …
materials was quantitatively evaluated using Labusch model by consideration of the …
Effects of the strain rate on the tensile properties of a TRIP-aided duplex stainless steel
Factors influencing the strain-rate dependence of the tensile properties of TRIP-aided lean
duplex stainless steel were investigated by employing several characterization techniques …
duplex stainless steel were investigated by employing several characterization techniques …
Influence of in-plane simple shear strain on the grain orientation regulation and stretch formability of pre-twinned AZ31 magnesium Alloy sheet
Pre-twin is widely accepted as an efficient method for weakening the basal texture to
improve the plasticity of magnesium alloys, particularly for formability. However, the …
improve the plasticity of magnesium alloys, particularly for formability. However, the …
The state of residual stresses in the Cu/Steel bonded laminates after ISF deformation: An experimental analysis
X Shi, G Hussain, SI Butt, F Song, D Huang… - Journal of Manufacturing …, 2017 - Elsevier
Abstract Incremental Sheet Forming (ISF) is a novel sheet forming process. Being
characterized by severe deformation, the process is likely to induce high residual stresses in …
characterized by severe deformation, the process is likely to induce high residual stresses in …
The grain boundary character distribution in thermomechanically processed rare earth bearing magnesium alloy
The present work was conducted to examine the grain boundary character distribution in a
rare earth elements bearing magnesium alloy during thermomechanical processing (TMP) …
rare earth elements bearing magnesium alloy during thermomechanical processing (TMP) …
[HTML][HTML] Effect of unusual texture on tension-compression asymmetry for Mg-RE alloy by viscoplastic self-consistent modeling
X Zhang, R Zhou, C Li, H Yue, Q Chen - Journal of Magnesium and Alloys, 2024 - Elsevier
The tension-compression asymmetry presents notable challenges for the application of
magnesium alloys in many fields. In this study, the solid-solution treated Mg-8.5 Gd-4.5 Y-0.8 …
magnesium alloys in many fields. In this study, the solid-solution treated Mg-8.5 Gd-4.5 Y-0.8 …
Improving the room-temperature formability of a magnesium alloy sheet by texture control
In this study, a sheet of AZ31 magnesium alloy was compressed by 3%, 5%, and 7% along
the in-plane direction while simultaneously applying a compressive load in the normal …
the in-plane direction while simultaneously applying a compressive load in the normal …