[HTML][HTML] Magnesium research in Canada: Highlights of the last two decades
F Czerwinski - Journal of Magnesium and Alloys, 2023 - Elsevier
The highlights of major Canadian research projects of last two decades that aimed at
advancing applications of magnesium and its alloys, being at the heart of lightweighting and …
advancing applications of magnesium and its alloys, being at the heart of lightweighting and …
Preparation and properties of high purity Mg–Y biomaterials
An effective zone solidification method has been found to prepare high purity Mg–Y
biomaterials. The corrosion and mechanical properties of the purified middle region are …
biomaterials. The corrosion and mechanical properties of the purified middle region are …
The effect of alloy composition on the microstructure and tensile properties of binary Mg-rare earth alloys
Additions of La, Ce and Nd to commercially pure Mg were made up to∼ 5wt.%. It was found
that the intermetallic phases formed in the eutectic were Mg12La, Mg12Ce and Mg3Nd …
that the intermetallic phases formed in the eutectic were Mg12La, Mg12Ce and Mg3Nd …
Influence of the microstructure on the corrosion behaviour of cast Mg-Al alloys
M Grimm, A Lohmüller, RF Singer, S Virtanen - Corrosion Science, 2019 - Elsevier
The influence of α-phase and β-phase (Mg 17 Al 12) on corrosion of cast binary Mg-Al alloys
was investigated by immersion testing in 5 wt.-% NaCl solution saturated with Mg (OH) 2 …
was investigated by immersion testing in 5 wt.-% NaCl solution saturated with Mg (OH) 2 …
Defect band characteristics in Mg-Al and Al-Si high-pressure die castings
CM Gourlay, HI Laukli, AK Dahle - Metallurgical and Materials …, 2007 - Springer
Bands of positive macrosegregation and porosity commonly follow the surface contour of
components produced by high-pressure die casting (HPDC). In this article, Al alloy AlSi7Mg …
components produced by high-pressure die casting (HPDC). In this article, Al alloy AlSi7Mg …
Microstructural stability and creep properties of die casting Mg–4Al–4RE magnesium alloy
T Rzychoń, A Kiełbus, J Cwajna, J Mizera - Materials Characterization, 2009 - Elsevier
The AE44 (Mg–4Al–4RE) alloy was prepared by a hot-chamber die casting method. The
microstructure, microstructural stability and creep properties at 175° C were investigated …
microstructure, microstructural stability and creep properties at 175° C were investigated …
Influence of cooling rate on microsegregation behavior of magnesium alloys
The effect of cooling rate on microstructure and microsegregation of three commercially
important magnesium alloys was investigated using Wedge (V‐shaped) castings of AZ91D …
important magnesium alloys was investigated using Wedge (V‐shaped) castings of AZ91D …
Microstructure and nano-scale mechanical behavior of Mg–Al and Mg–Al–Ca alloys
L Han, H Hu, DO Northwood, N Li - Materials Science and Engineering: A, 2008 - Elsevier
The microstructure of magnesium alloys containing aluminum (AM50) and calcium (AC51
and AC52) cast by high-pressure die casting (DC) or permanent mold casting (PM) were …
and AC52) cast by high-pressure die casting (DC) or permanent mold casting (PM) were …
Relationship between the 3D porosity and β-phase distributions and the mechanical properties of a high pressure die cast AZ91 Mg alloy
Currently, most magnesium lightweight components are fabricated by casting as this
process is cost effective and allows forming parts with complex geometries and weak …
process is cost effective and allows forming parts with complex geometries and weak …
Experimental analysis of electrical discharge coating characteristics of magnesium alloy using response surface methodology
U Elaiyarasan, V Satheeshkumar… - Materials Research …, 2018 - iopscience.iop.org
Electrical discharge coating (EDC) process is one of the surface modification method to
deposit electrode material (WC 50% Cu 50%) on the surface of the desired material. In the …
deposit electrode material (WC 50% Cu 50%) on the surface of the desired material. In the …