Yttrium silicates (Y–Si–O oxides), including Y2Si2O7, Y2SiO5, and Y4· 67 (SiO4) 3O apatite,
have attracted wide attentions from material scientists and engineers, because of their …

ABSTRACT The Ni-Al ferrite nanoparticles are synthesized by the flash auto-combustion
method, and PANI is synthesized by the situ-chemical oxidative polymerization method. NiAl …

In this article, a novel pressureless solid-liquid reaction method is presented for preparation
of yttrium disilicate (γ-Y 2 Si 2 O 7). Single-phase γ-Y 2 Si 2 O 7 powder was synthesized by …

In this work, Ni-doped SrBi 2 Nb 2 O 9 (Sr 1-x Bi 2+ x Nb 2-x Ni x O 9-x, or SBNN) ceramics
were successfully fabricated by using a solid state reaction method, and their band gaps …

Environmental concerns have led to a strong focus on the development of lead free
materials for ever expanding electroceramics industry. Strontium barium niobate …

In recent years, the development of inert anode materials has gained considerable attention
because such materials are capable of producing only environment-friendly O2 and saving …

Abstract TiO 2-added Ba 4 (Sm 0.65 Nd 0.35) 9.33 Ti 17.75 Al 0.33 O 54 (BSNTA) ceramics
were fabricated with a solid-state reaction method. Slight TiO 2 addition increased the …

Abstract Nano-crystalline Sr 0.5 Ba 0.5 Nb 2 O 6 was synthesized by a one-pot method
using PEG400 and citric acid. Calcination of the (Sr, Ba, Nb)-gel at 600° C leads to Sr 0.5 Ba …

Abstract Nano-crystalline Sr 0.5 Ba 0.5 Nb 2 O 6 powders with addition of LiNbO 3 or LiF as
sintering additives were prepared by a soft-chemistry synthesis using polyethylene glycol …

Abstract Pb (Ni1/3Nb2/3) O3–Pb (Zr, Ti) O3 (PNNZT) ceramics were sintered in different
atmospheres (O2, N2 and air) and the effects of different sintering atmospheres on dielectric …