In this study, the influences of heat treatment (HT) in combination with subsequent laser
shock peening (LSP) on the strength-toughness and isotropy of laser powder bed fused …

This research investigates a paradigm shift in heat treatment practises that is characterised
by transformational changes. Despite their widespread use, traditional technologies are …

The laminate heterogeneous GW103K (Mg-10Gd-3Y)/AZ31 (Mg-3Al-1Zn) alloys were
obtained by diffusion bonding and hot rolling. The influence of the interfacial layer numbers …

One major advantage of additive manufacturing is the high freedom of design, which
supports the fabrication of complex structures. However, geometrical features such as …

The study investigates the impact of heat treatments on residual stresses and mechanical
properties in Ti-6Al-4V samples fabricated via laser powder bed fusion (LPBF). LPBF …

Abstract A TC4/TA2 honeycomb structure was fabricated using Selective Laser Melting. The
study primarily investigates the impact of process parameters on the mechanical properties …

This study examines the role of nano B 4 C addition in improving the mechanical properties
of Ti–6Al–4V (Ti64) alloys fabricated by laser melting deposition under as-built and heat …

With the rising demand for medical implants and the dominance of implant-associated
failures including infections, extensive research has been prompted into the development of …

Laser-based powder bed fusion of metals (PBF-LB/M) enables the production of complex
parts with high freedom of design. However, changes in cross-sectional area with build …

The hardness and wear resistance of the surface of TC4 titanium alloy, which is widely used
in aerospace and other fields, need to be improved urgently. Considering the economy …