We present a brief review and perspective on the development of eutectic alloys,
emphasizing the emergence of complex microstructures during eutectic solidification of …

Al–Si–Cu–Mg cast aluminum alloys have important applications in automobile lightweight
due to their advantages such as high strength-to-weight ratio, good heat resistance and …

Commonly used commercial cast aluminum alloys for the automotive industry are viable for
temperatures only up to 250° C, despite decades of study and development. Affordable cast …

In this paper, the effects of T6 heat treatment at different solution-treated temperatures (400°
C, 450° C, 500° C and 540° C) on the microstructure, wear and corrosion properties of …

The effect of annealing on the tribological and corrosion properties of Al–12Si samples
produced by selective laser melting (SLM) is evaluated via sliding and fretting wear tests …

In this paper, a new type of Al-8Si-1.5 Cu-1Ni-0.5 Mg-0.5 Mn-0.2 Ti-0.2 Zr-0.2 V-0.06 Sr alloy
(Al-Si-Cu-Ni alloy for short) was prepared by combining micro-alloying and squeeze casting …

The near-eutectic Al-12 wt.% Ce alloy has been alloyed with 0.4 wt.% Sc to improve its
creep resistance. A bidirectional influence between Sc and Ce has been identified:(i) the Ce …

The effect of Zr addition to Al rich binary α-Al-Al 3 Ni eutectic cast alloy (Al-3.1 at.% Ni) in
enhancing the microstructural stability and strength at high temperature is demonstrated. On …

High-temperature performance is a key factor to concern for the application of cast Al–Si
alloys. The evolution of microstructures and mechanical properties of a multiphase Al–Si–Cu …

In this study, the compositional dependence of the age hardening response and high
temperature tensile properties of the Mg–xGd–3Y–0.5 Zr (x= 3, 6, 10, and 12 wt%) alloys are …