The extensive range of steel types and classifications results in a diverse set of properties
such as plasticity, heat resistance, strength, and corrosion resistance. This diversity enables …

Martensitic stainless steel AISI 431 and low carbon steel AISI 1020 are materials used
together in many different industries. However, important problems are encountered when …

series aluminum (Al) alloy is a promising material that can meet the ever-increasing
lightweight demand for transportation tools. However, the assembly between Al alloy and …

Resistance spot welding was used to join AISI 316L stainless steel to DIN 33MnCrB5-2 low
alloy steel using Ni powder interlayer and foil of ERNiCr-3 filler wire. Optical microscopy and …

The primary cause of tool failure in rough cutting is the severe tool-chip friction brought on by
chip adhesion and abrasive wear. To address the problem, the influence of combinations of …

In this study, the application of stud welding to IF 7114 steel sheets in the automotive
industry using stainless steel and copper-plated steel studs with different diameters and …

In this study, a drawing arc stud welding method combined with a longitudinal magnetic field
was used for welding a 30CrNi3MoV low-alloy super strong steel substrate and Q235 hollow …

In this study, stud welding of 304 austenitic stainless steel stud–copper plate was carried out
at seventeen different welding voltages between 50 and 130 V. The microstructure …

In this research, 316L austenitic stainless steel (ASS) and medium carbon steel (MCS) were
joined together by resistance spot welding. ERNiCr-3 filler wire in a form of foil was utilized …

The rotary friction welding (RFW) process is one of the most widely utilized methods for
producing industrial components with high mechanical strength. All of the processes take …