It is quite important to clearly understand the dynamic process of single splat formation for
optimizing the plasma spraying process. In present study, a three-dimensional model …

Understanding the mechanism underlying metal matrix composites (MMCs) in cold spraying
is critical to fabricating innovative MMC coatings and deposits with tailored microstructures …

The paper aims at the quantitative characterization of solidification morphologies of plasma
sprayed Fe-based amorphous splats. The spraying power was adjusted to provide the …

Splats are obtained on the substrates inclined at different angles (0°, 20°, 40° and 60°) by
plasma spraying process and characterized by SEM and WYKO® optical surface profiler …

In the thermal spray process, the film is built up by impingement of molten droplets onto
substrate. Splats are created by flattening and spreading of the impacting droplets. Splat …

The paper deals with the quantitative characterization of spreading morphologies of plasma
sprayed Fe-based alloy droplets deposited on mirror polished steels with different preheated …

In this paper, the dynamic impact behavior of a particle and a substrate under different
particle temperatures and velocities as well as using different materials for the particle and …

In this study, a numerical simulation and experiments were performed to analyze the
formation process of splat in the laser texture groove of filling molybdenum droplets during …

For a thermally sprayed coating, a strong adhesion between the coating and the substrate is
critical for its service performance. Furthermore, the adhesion between the coating and the …

Accepted: 13 March 2023 In the thermal spray procedure described in this research, a single
aluminum particle is deposited and flattened using thermomechanical modeling and …