高性能金属材料雾化与成形技术研究进展.
张国庆， 刘娜， 李周 - Journal of Aeronautical Materials, 2020 - search.ebscohost.com
本文综述北京航空材料研究院在高温合金气体雾化粉末, 喷射成形高温合金, 粉末冶金TiAl
合金以及喷射成形高速钢等高性能金属材料雾化与成形技术研究领域的主要研究成果 …
合金以及喷射成形高速钢等高性能金属材料雾化与成形技术研究领域的主要研究成果 …
Research progress on argon atomized nickel-based powder metallurgy superalloys and powder characteristics
Z Qiang, Z Liang, XU Wen-yong, LI Zhou… - Powder Metallurgy …, 2022 - pmt.ustb.edu.cn
The development of nickel-based powder metallurgy (PM) superalloy, the technical features
of argon atomized (AA) powder manufacturing, the characteristics of AA nickel-based …
of argon atomized (AA) powder manufacturing, the characteristics of AA nickel-based …
Surface segregation and oxidation behavior of superalloy powders fabricated by argon atomization
ZJ Gao, GQ Zhang, Z Li, H Yuan, WY Xu… - Materials Science …, 2013 - Trans Tech Publ
Particle surface component and valence state of nickel-based superalloy FGH96 powders
fabricated by argon gas atomization have been measured by X-ray phoelectron …
fabricated by argon gas atomization have been measured by X-ray phoelectron …
紧耦合气雾化制备热喷涂NiCrAlY 合金粉
王峻， 周欣， 杜仲， 赵虹淳， 张保红， 熊宁 - 粉末冶金技术, 2023 - pmt.ustb.edu.cn
采用紧耦合气雾化技术制备热喷涂NiCrAlY 合金粉末, 对NiCrAlY 合金粉末的物理性能,
粒度分布, 粉末形貌, 微观结构和物相组成等进行了分析. 结果表明, 粉末以球形和近球形颗粒为 …
粒度分布, 粉末形貌, 微观结构和物相组成等进行了分析. 结果表明, 粉末以球形和近球形颗粒为 …
镍基粉末高温合金枝晶间亚稳碳化物
马文斌， 刘国权， 胡本芙， 吴凯， 张义文 - 工程科学学报, 2013 - cje.ustb.edu.cn
对急冷凝固镍基高温合金松散粉末热等静压成型合金中亚稳碳化物及其相间反应进行了研究.
随着热处理温度的升高, 粉末中合金元素的分布逐渐均匀化, 但枝晶间MC …
随着热处理温度的升高, 粉末中合金元素的分布逐渐均匀化, 但枝晶间MC …
Comparative Study of Nickel-Based Super-Alloy Powders Atomized by Argon and Nitrogen
This work allowed the study and comparison of the cooling rate, surface morphology, and
microstructure of nickel-based super-alloy powders produced by the atomization of argon …
microstructure of nickel-based super-alloy powders produced by the atomization of argon …
Non-equilibrium carbides in the interdendritic region of a nickelbased powder metallurgy superalloy
W MA, G LIU, B HU, K WU, Y ZHANG - Chinese Journal of …, 2013 - cje.ustb.edu.cn
This article studies carbides and their reactions in nickel-base superalloy powders prepared
by rapid solidification and the hot isostatic pressed (HIPed) alloy. With the pre-treated …
by rapid solidification and the hot isostatic pressed (HIPed) alloy. With the pre-treated …
Preparation and Characteriziation of Cu-Cr Alloy Powders
P Xiao, XY Zhang, HW Lu - Advanced Materials Research, 2012 - Trans Tech Publ
Cu-1.37 Cr alloy powders were prepared by gas atomization process, and the cooling rates
of alloy powders were calculated through the convection heat transfer principle. The …
of alloy powders were calculated through the convection heat transfer principle. The …