Friction stir welding is not only a solid-state joining method used mostly for metals and
alloys, but also, used for joining various polymer materials. This literature review includes …

For the fatigue reliability analysis of aeroengine blade-disc systems, the traditional direct
integral modelling methods or separate independent modelling methods will lead to low …

In order to reveal the influence of welding method on the cyclic plasticity and ultra-low cycle
fatigue (ULCF) behavior of low-alloy butt-joints, three different welding methods, namely …

In this investigation the friction stir welded joint of 5 mm thick AA7075-T651 alloy have been
subjected to the post-weld explosive treatment. To assess the influence of the proposed …

This study examines the characteristics of Fatigue Crack Growth Rate (FCGR) in AA 7075-
T651 Friction Stir Welded (FSW) joints with a thickness of 16 mm. Compact tension (CT) …

This study investigated the effect of a hemispherical friction stir welding (FSW) tool on the
heat generation and mechanical properties of dissimilar butt welded AA5083 and AA7075 …

High-temperature ratcheting fatigue behavior of a friction stir welding (FSW) Al-Zn-Mg-Cu
alloy was investigated. The substructured grains in the weld nugget zone (WNZ) undergo …

As a vertical vehicle, the operation mode of the elevator is changeable, and its operating
parameters affect the emergency braking fatigue life of the brake wheel. It is essential to …

The article presents an assessment of the possibility of using ashes from the combustion of
coal and biomass as a reinforcing phase in metal matrix composites. The composite surface …

In the case of operating technical objects in conditions that accelerate material wear, it is
necessary to adequately protect the object from the aggressive working environment. There …