For decades, high susceptibility to intergranular corrosion and stress corrosion cracking is
the Achilles's heel for the 5xxx series Al alloys with high Mg (> 3 wt%) owing to precipitation …

Localized corrosion of the aluminium alloy AA5083-H111 in a simulated dynamic
seawater/air interfacial zone and a full seawater immersion zone was investigated with …

Extreme high-speed laser cladding (EHLA) was used to develop a pore-and crack-free
TiC/IN625 coating. The surface roughness of EHLA could be as low as 6.004 µm. A more …

The effect of a 150° C/144 h sensitization treatment on the localized corrosion of AA5083-O
in a simulated dynamic seawater/air interface zone was investigated using electrochemical …

Electrochemical measurements and microstructural analyses were conducted to investigate
the corrosion behaviors on different planes of Sc and Zr modified Al-Mg alloy produced by …

Minor additions of Sc and Zr to a 5182 base alloy were used to study the effects of
microstructure on the susceptibility to intergranular corrosion (IGC) of 5xxx sheet alloys. The …

Mg alloys have been regarded as revolutionary metallic biomaterials for biodegradable
bone implants, but their applications are mainly blocked by the too rapid degradation in …

This paper provides a new insight into the understanding of the susceptibility to intergranular
corrosion (IGC) of 2024 Al alloy. Whatever the exposure conditions, coincidence site lattice …

In this manuscript, the latest developments pertaining to sensitization are discussed.
Sensitization leads to intergranular corrosion and intergranular stress corrosion cracking …

The effect of hafnium (Hf) addition on microstructural evolution and corrosion behavior of
nickel-based alloys was investigated. The findings indicated that adding Hf appropriately …