Superconducting fault current limiters (SFCLs) are the most attractive devices for the power
network, because limiters can be used to limit the short current in electrical network. This …

Limiting operation of a superconducting fault current limiter (SFCL) depends on multilateral
interaction effects among the three critical delimited superconductivity parameters, namely …

The scope of this article was to find the transient response of the 2G high-temperature
superconducting (HTS) tape under alternating overcurrent. The authors performed a series …

Superconducting fault current limiters (SFCL) are designed to protect the electrical grid from
faults that result from lightning strikes, downed power lines and other system interruptions …

A superconducting fault current limiter (SFCL) reduces the short-circuit current level in a
power system and thus provides protection for and significantly reduces the wear and tear of …

A superconducting fault current limiter (SFCL) for medium voltage networks cooled by a
cryocooler was designed, built and tested by the current author. For the construction of this …

This paper presents a new type of bridge type SFCL with a bypass resistor. The proposed
topology overcomes the drawbacks of the conventional diode bridge SFCL that can limit the …

The design, fabrication and tests of three high temperature superconductor (HTS) coils for a
rectifier-type model fault current limiter (FCL) were presented. The field distributions in the …

In the article after the introduction, containing the idea and principle of operation of the
SFCL, selected prototypes and scientific projects (Korean and Russian) of superconducting …

This paper presents the design and tests of a superconducting fault current limiter (SFCL) for
medium voltage as a device allowing for a more effective use of the existing power network …