This work pioneered the study on the effect of cyclic-loading-induced strain burst on Stage-
1b stress corrosion crack (SCC) growth under alternating static and cyclic loading. Results …

Pressure transients have been identified as one of the major contributing factors in many
pipe failures in water distribution systems (WDSs). The behavior of these pressure transients …

This investigation was initiated to provide governing equations for crack initiation, crack
growth, and service life prediction of pipeline steels in near-neutral pH (NNpH) …

In a pilot study for the diagnosis through transient tests of the water distribution systems of
Milan, Italy, hydrants were used for both pressure measurement and pressure wave …

The strength, toughness, corrosion, and fatigue resistance are the main requirements for
evaluating the integrity of a pipeline. In this study, the tensile strength, impact toughness …

This research focuses on monitoring and characterizing transient pressure patterns in urban
water distribution systems through high-frequency sensing. Water pressure, including …

Purpose: Due to changes in the volume of oil transportation, part of the pipelines must be
temporarily decommissioned. The purpose of the work is theoretical and experimental study …

According to the results of complex electrochemical, corrosion-mechanical and fractographic
studies, the existence of three potential regions, in which the stress-corrosion cracking …

In any pressure system, joints are the weakest region. Sealing characteristics is an important
parameter for having a safe operation in gasketed flange joints, in addition to structural …

The paper presents the results of stress corrosion resistance studies of welded joints of low-
alloy steel 17G1SU, obtained by high-frequency welding (HFW). The potentiometry method …