A review of studies in the field of production of coatings on metals by means of mechanical alloying
RA Savrai, AN Morozova - Surfaces and Interfaces, 2021 - Elsevier
The mechanical alloying method is widely used for production of powdered alloys. However,
focused studies have shown that this method may also be used for deposition of coatings …
focused studies have shown that this method may also be used for deposition of coatings …
High temperature cyclic oxidation resistance of 50Cr-50Al coatings mechanically alloyed on low carbon steel
In the present study, the 50Cr-50Al coatings were mechanically alloyed on low carbon steel
at two different milling times of 1 h and 4 h, and subsequently annealed in vacuum at 800° C …
at two different milling times of 1 h and 4 h, and subsequently annealed in vacuum at 800° C …
Preparation of ferrosilicon-aluminium coating using a mechanical alloying technique: Study of thermal annealing on their structural characteristics
In the present study, ferrosilicon-aluminium coating was successfully deposited on the
surface of low‑carbon steel using mechanical alloying (MA) technique. The coating …
surface of low‑carbon steel using mechanical alloying (MA) technique. The coating …
High temperature oxidation of Fe-Cr-Al coatings prepared by flame spray technique
AE Fath, D Aryanto, SA Saptari… - Journal of Physics …, 2019 - iopscience.iop.org
In the present study, Fe-Cr and (Fe-Cr)-30at% Al coatings were prepared by a flame spray
technique. The coated samples were then annealed in a vacuum furnace at 800 C for 2h …
technique. The coated samples were then annealed in a vacuum furnace at 800 C for 2h …
Development of MoSi2 coating with Al doping by using high energy milling method
MoSi 2 is well known as a material for high temperature application because it has high
oxidation and corrosion resistance. The aim of this research is to develop MoSi 2 coating …
oxidation and corrosion resistance. The aim of this research is to develop MoSi 2 coating …
The effect of annealing on structure and hardness of (Fe-Cr)-50 at.% Al coatings synthesized by mechanical alloying
C Ciswandi, D Aryanto, I Irmaniar, A Tjahjono… - AIP Conference …, 2018 - pubs.aip.org
In this research, the deposition of (Fe-Cr)-50at.% Al coatings on low carbon steel was
carried out by a mechanical alloying (MA) technique. The MA was performed in a shaker mill …
carried out by a mechanical alloying (MA) technique. The MA was performed in a shaker mill …
Microstructure transformation of Cr-Al coating on carbon steel prepared by ball milling method as a function of tungsten doping
AS Wismogroho, T Sudiro, A Didik - Journal of Physics …, 2018 - iopscience.iop.org
Abstract In present work, Cr-Al coatings containing 0, 1, 2, 3, and 5% W have been prepared
on the surface of low carbon steel by mechanical alloying technique. The composition of …
on the surface of low carbon steel by mechanical alloying technique. The composition of …
The effect of nitrogen gas flow rate on heat treatment of AISI SS-430: Study of microstructure and hardness
The aim of this research was to obtain the austenite phase from ferritic stainless steel
through sample heat treatment. The AISI 430 ferritic steel with the thickness of about 0.4 mm …
through sample heat treatment. The AISI 430 ferritic steel with the thickness of about 0.4 mm …
[PDF][PDF] High temperature cyclic oxidation resistance of 50Cr-50Al coatings mechanically alloyed on low carbon steel
AS Wismogroho, P Sebayang - Carbon, 2017 - researchgate.net
abstract In the present study, the 50Cr-50Al coatings were mechanically alloyed on low
carbon steel at two different milling times of 1 h and 4 h, and subsequently annealed in …
carbon steel at two different milling times of 1 h and 4 h, and subsequently annealed in …