[HTML][HTML] Experimental and numerical study of alumina reinforced aluminum matrix composites: Processing, microstructural aspects and properties
Co-continuous alumina–aluminum composite materials with excellent physical and
mechanical properties offer great potentials for lightweight, wear resistant, and high …
mechanical properties offer great potentials for lightweight, wear resistant, and high …
Bulk synthesis by spray forming of Al–Cu–Fe and Al–Cu–Fe–Sn alloys containing a quasicrystalline phase
VC Srivastava, E Huttunen-Saarivirta, C Cui… - Journal of Alloys and …, 2014 - Elsevier
Abstract In this study, Al–Cu–Fe alloys without and with the addition of Sn and containing a
quasicrystalline phase were spray deposited. The spray-deposited bulk materials were …
quasicrystalline phase were spray deposited. The spray-deposited bulk materials were …
Structure and mechanical properties of Al-Cu-Fe-X alloys with excellent thermal stability
A Školáková, P Novák, L Mejzlíková, F Průša, P Salvetr… - Materials, 2017 - mdpi.com
In this work, the structure and mechanical properties of innovative Al-Cu-Fe based alloys
were studied. We focused on preparation and characterization of rapidly solidified and hot …
were studied. We focused on preparation and characterization of rapidly solidified and hot …
The formation of quasicrystals in Al-Cu-Fe-(M= Cr, Ni) melt-spun ribbons
The influence of Cr and Ni additions in rapidly-solidified Al-Cu-Fe alloys was investigated.
Four compositions, namely, Al 64 Cu 20 Fe 13 Ni 3, Al 63 Cu 18 Fe 10 Ni 9, Al 65 Cu 22 Fe …
Four compositions, namely, Al 64 Cu 20 Fe 13 Ni 3, Al 63 Cu 18 Fe 10 Ni 9, Al 65 Cu 22 Fe …
[PDF][PDF] Quasicrystalline phase formation in the conventionally solidified Al--Cu--Fe system.
Structural characteristics and thermal behaviour of the conventionally solidified Al–Cu–Fe
alloys with nominal compositions of Al70Cu20Fe10, Al65Cu20Fe15 and Al63Cu25Fe12 …
alloys with nominal compositions of Al70Cu20Fe10, Al65Cu20Fe15 and Al63Cu25Fe12 …
Characterization of the icosahedral quasicrystalline phase in rapidly solidified Al–Cu–Fe alloys
The present research aimed to characterize the microstructure of icosahedral
quasicrystalline phase (i-phase) in different chemical compositions of Al–Cu–Fe alloys. The …
quasicrystalline phase (i-phase) in different chemical compositions of Al–Cu–Fe alloys. The …
The effect of microwave radiation on the formation of quasi-crystalline phases in the Al-Cu-Fe system prepared by induction furnace
V Aghaali, MR Rahimipour, A Faraji… - Materials Today …, 2024 - Elsevier
Aluminium-copper-iron quasi-crystals were prepared by melting raw materials and heat
treatment process using microwave radiation at three temperatures of 600° C, 700° C, and …
treatment process using microwave radiation at three temperatures of 600° C, 700° C, and …
Morphological characteristic of the conventional and melt-spun Al-10Ni-5.6 Cu (in wt.%) alloy
E Karaköse, M Keskin - Materials characterization, 2009 - Elsevier
The Al-10Ni-5.6 Cu alloy was prepared by conventional casting and further processed melt-
spinning technique. The resulting conventional cast and melt-spun ribbons were …
spinning technique. The resulting conventional cast and melt-spun ribbons were …
[PDF][PDF] Characterization of Rapidly Solidified Alloy in Form of Powder or Ribbon
L Lityńska-Dobrzyńska, J Dutkiewicz… - … Physica Polonica A, 2014 - bibliotekanauki.pl
The Al_65Cu_20Fe_15 alloy has been prepared by conventional casting to the mould and
by melt spinning or atomisation techniques. The melt spun ribbon was in the form of …
by melt spinning or atomisation techniques. The melt spun ribbon was in the form of …
Synthesis and brittle-to-ductile transition of the ω-Al0. 7Cu0. 2Fe0. 1 tetragonal phase
Synthesis of ω-Al–Cu–Fe single phase material is reported. Microhardness tests performed
over the temperature range 293–898K indicate a brittle-to-ductile transition between 673K …
over the temperature range 293–898K indicate a brittle-to-ductile transition between 673K …