The custom design of surfaces with special wettability properties has been extensively
studied over the last two decades and can be now obtained using a wide range of materials …

Advancements in optical lithography tools, processes, and patterning materials have been
critical to the continued performance increases of semiconductor devices as well as to the …

Shock‐induced low‐frequency vibration damage is extremely harmful to bionic soft robots
and machines that may incur the malfunction of fragile electronic elements. However, current …

This paper reports a bio-based vanillin-derived epoxy (VDE) resin for bio-based natural fiber-
reinforced composites. VDE monomer was synthesized, and curing agents, namely, 4, 4´ …

Polymer nanocomposites with high energy density and low dielectric loss are highly
desirable in electronic and electric industry. Achieving the ability to tailor the interface …

The surface wettabilities of polymer brushes with hydrophobic and hydrophilic functional
groups were discussed on the basis of conventional static and dynamic contact angle …

The review reports most of the works realized in the field of the surface wettability based on
conducting polymers. The surface wettability is highly depending on the intrinsic …

The dramatic increase in waste plastics has created a hazard to our health and ecosystems.
And separation of waste plastics has been the highlight of recycling because plastic …

A superhydrophobic surface with anti-icing performance has been the focus of research, but
few studies have reported the effective and low cost strategy that met the requirements …

Omniphobic fluorogel elastomers were prepared by photocuring perfluorinated acrylates
and a perfluoropolyether crosslinker. By tuning either the chemical composition or the …